Pulling machine screw heat exchanger core pulling machine

Pulling machine screw heat exchanger core pulling machine width: 0.6-2.0m lead: 6-8m bracket weight; 20T, 30T, 45T is equipped with power: 18.5-30KW is fine CHX-core pulling machine is a refinery maintenance heat exchanger equipment, which can produce a variety of specifications according to the diameter of the heat exchanger. It is based on Y series motor and BWD cycloid planetary reducer for power, with the ladder screw drive, with Rally, stable core pulling, effort, time, without damaging the core features, is proven Refinery maintenance equipment ideal heat exchanger. Pulling machine is refinery maintenance heat exchanger equipment, can produce all kinds of heat exchanger according to diameter. The advantage is that power, smooth operation and safety. Right-hand man refinery maintenance personnel. CHX use a core-pulling machine, the reduction gear box filling gear oil; lubricants grades 40 # -50 # machinery oil, grease or gear. Second, the first refueling after running 160 hours be replaced with new oil. Bearing Grease replaced at least once a year. Third, the core pulling movement with jacks top live child, the core-pulling machine tailstock top tight Pulling machine housing flange face, with the housing flange drill holes with core-pulling machine tailstock housing is bolted firmly. Fourth, the rope Pulling the child wound movement, and the other end connected at a fixed nut. After the check, start the starter motor work. Fifth, the two heavy vehicles put entrusted with by the core end; near nut first bracket higher than the other heavy vehicles should be properly care heavy vehicles, (set out under field conditions). When the core out of contact with the first holder heavy vehicles, when able to get out a certain distance, the core will inevitably fall into another heavy vehicle care, until the core completely out. Pulling machine performance tables CHX Zibo Jingzheng heavy slurry pump Co. / heat exchanger core pulling Pulling Machine Screw Machine