Steel lining tetrafluoride tube technology

Steel liner tetrafluoroethane tube technology: Firstly, steel-lined push (squeeze) is pressed into the pipe, and then pull it forcibly into seamless steel pipe (pipe inner diameter slightly larger than the outer diameter of the liner 1.5-2mm), no gap is formed tight lining. In order to eliminate stress, put it in an oven heated to 180oc constant temperature treatment, to adapt for use in temperature below the 180oc. At the same time, push (squeeze) pressure pipe axial tensile strength significantly better than Pipe. This pipeline has ideal resistance to positive and negative pressure capability. Steel lining tetrafluoride tube should look homogeneous, smooth appearance, does not allow cracks, bubbles, delamination, mechanical scratches, bow of the sleeve shall not exceed 2 mm, but allowing a small amount of foreign material. Teflon tubing outside diameter minus tolerance of not less than 1mm, the inner diameter of positive tolerances not more than 1mm. Can -180 ℃ - + 260 ℃ temperature use, in the known plastic material, it has the lowest coefficient of friction, the best corrosion resistance Contact: Mo Manager Tel: 0379-60692520 13525917859 Website: http : //www.nmgdw.com/ http://www.jhgdgy.com Address: Luoyang City Xigong Jingu Road 72 Riverside Building Plant Address: Luoyang Airport Road Industrial Park Sales Address: Luoyang City King City area in the West Road 111 in Luoyang City of Science and Technology Information