G49J tee rubber lined diaphragm

G49J tee rubber lined diaphragm, G49J-10 model with rubber valve is used to change the channel section and flow direction of medium, with a diversion, off, adjust the throttle, check, diversion or overflow functions. The valve can be used to control the flow of water, steam, oil, gas, mud, corrosive media, liquid metals and radioactive fluids and other fluids. G49J tee rubber lined diaphragm dedicated to the control of non-corrosive or corrosive media, the body cavity surface covered with unlined or choose from a variety of rubber, for different operating temperatures and fluid lines. Diversity lining material, suitable for all kinds of media, and has good corrosion resistance. Body and cover are separated by the intermediate membrane so that the membrane above the bonnet, stem the erosion of parts from the media, it is a special form of diaphragm valve. Two, G49J-way rubber lined diaphragm material: Body: cast iron, ductile iron, carbon steel, stainless steel bonnet: cast iron, ductile iron, carbon steel, stainless steel lining: no lining, rubber diaphragm: rubber valve: cast iron, carbon Steel Stem: carbon steel, stainless steel handwheel: cast iron three, G49J tee rubber lined diaphragm test: backing layer: spark testing and inspection according to BS6755 standard nominal pressure: PN (MPa) Body: PN × 1.5 seal: PN × 1.1 four, G49J tee rubber lined diaphragm Features: Diaphragm is a special form of valve: 1. elastic sealing of the shutter to ensure no leakage; 2. streamline the flow channel, so that the pressure loss small; 3. No stuffing, so there is no leakage; 4. Body and cover are separated by an intermediate membrane so that the membrane above the bonnet, stem and other parts from the media erosion; 5. membrane can be replaced, and maintenance costs low ; diversity 6. lining material, suitable for all kinds of medium and high strength, corrosion resistance and good. No. Part Name gray iron cast stainless steel acid-resistant stainless steel cast ZCPRPR 1 ultra-low body / bonnet HT250 WCB CF8 CF8M CF3 CF3M 2 valve / stem 35 1cr13 1Cr18Ni9Ti 1Cr18Ni12Mo2Ti 00cr18Ni10 00Cr17Ni14Mo2 3 lining / seat PTFE ( F4), PCTFE (F3), FEP (F46), PFA (soluble F4) 4 Diaphragm FEP (F46) / CR (chloroprene rubber), PFA (soluble F4) / FPDM (EPR) 5 Bracket WCB CF8 CF8 6 ZCuAI10Fe3 ZCuAI10Fe3 ZCuAI10Fe3 7 stem nut fastening bolts 35 1Cr17Ni2 1Cr18Ni9Ti 8 nut 45 0Cr18Ni9 0Cr18Ni9 9 handwheel WCB WCB WCB Ordering Information: Dear users Hello: If you really want to use before G49J tee rubber lined diaphragm sure To check the good following product parameters and our sales staff. A, 1, product name and model 2, the valve diameter, 3, pipeline pressure valves used, 4, valve body material, 5 conditions of temperature, the enclosure so that for your correct selection. Second, it has been selected by the design G49J tee rubber lined diaphragm models can be ordered from our sales department directly by the relevant models. Third, when the occasion is very important or the environment is more complicated, you try to provide design drawings and detailed parameters, by our technical staff three subjects valves free audit checks. You are welcome to visit our website www.yjskfm.com refer to the technical parameters related products, thank you for your attention, and if you are on our products, services have any suggestions or questions, please contact us immediately! We will try our best to provide you with quality services.