QBY stainless steel pneumatic diaphragm pump

■ QBY stainless steel pneumatic diaphragm pump Product Overview: Valve-resistant stainless steel production QBY pneumatic diaphragm pump is a new transport machinery, is the most innovative country a pump. Use of air compressors compressed air as a power source for all kinds of corrosive liquid, with particles of liquid, high viscosity, volatile, flammable, poisonous liquid can be pumped exhaust. Its performance parameters and WLLDENPVMPS Federal Republic of Germany, and US MARIOWPUMPS factory currently has a series production, a total of eight specifications diameter:. ￠ 10mm (3/8 ";), ￠ 15mm (1/2";), ￠ 25mm (1 ";), ￠ 40mm (1 1/2";), ￠ 50mm (2 ";), ￠ 65mm (2 1/2";), ￠ 80mm (3 ";), ￠ 100mm (4" ;). Three materials, aluminum, cast iron, stainless steel. Diaphragm pumps were used nitrile rubber, chloroprene rubber, fluorine rubber, PTFE depending on the liquid medium. To meet the needs of different users. Since the operation of the pump, has been adopted by more than a thousand domestic petroleum, chemical, electronics, ceramics, textiles, paints, pharmaceuticals mechanical system units, placed in the kinds of special occasions, for pumping a variety of conventional pumps can not pump the media, and instead gear pump ideal products, both taken satisfactory results. ■ QBY stainless steel pneumatic diaphragm pump Model significance: ■ QBY stainless steel pneumatic diaphragm technical parameters: Flow: 0-30m3 / h; Head: 0-50m; caliber: 10-100mm; temperature: -15- + 120 ℃; pressure : 0.1-0.7MPa; self-priming height: 5-7m. ■ QBY stainless steel pneumatic diaphragm pump Features: QBY stainless steel pneumatic diaphragm pump is a reciprocating diaphragm deformation caused by the volume change of the volume of the pump, it works similar piston pump, since the characteristics of pneumatic diaphragm pump works, so pneumatic diaphragm pump has the following characteristics: (1) Pump will not overheat: compressed air powered, is an expansion in the exhaust endothermic process, pneumatic pump when the operating temperature is lowered, no harmful gas emissions. (2) does not have a spark: pneumatic diaphragm pumps without electricity for power, ground and then prevent electrostatic spark (3) through a liquid containing particles: type of work and because of the volume of imports for the ball, it is not easily blocked. (4) low shear force on the material: how work is sucked into how spit, so the smallest stir of materials suitable for the delivery of unstable substances (5) flow can be adjusted, can be installed in the material at the outlet section valve to regulate the flow. (6) has a self-priming function. (7) can be dry run without danger. (8) Diving work. (9) The fluid can be delivered in a very wide range, from low viscosity to high viscosity, from the corrosive viscous. (10) No complex control system, no cable, fuses. (11) small size, light weight, easy to move. (12) without lubrication so maintenance is simple and will not pollute the environment due to the leakage. (13) pump is always able to maintain efficient, will reduce wear. (14) 100% of energy use, when to close the outlet, the pump automatically shut down, equipment movement, wear, overload, fever. (15) No dynamic seal, easy maintenance to avoid leaks. Work no dead spots. ■ QBY stainless steel pneumatic diaphragm-type spectrum: