How DSF-40 Submerged electromagnetic pulse valve submerged models complete selection of high quality solenoid valves

Selection of high quality submerged electromagnetic pulse valve: 1, select high low pressure range can apply pulse valve: pressure range submerged pulse valve needs to reach at least 1 ~ 8kg / cm2. Thus in the application process if the filter resistance increases over time, you can adjust the air pressure to keep the dust bag good running resistance, to ensure that the filter will not be burnt bag. 2. Select the low resistance pulse valve: the internal structure of the injection pulse valve needs to ensure broad-minded, long stroke diaphragm inside the valve housing structure small resistance from hydrodynamic design. Since the power station valve body count set incorrectly, some gas injection valve 3 interface can only reach the gas valve injection of 1 to 2 interfaces. Use low resistance, high injection volume of submerged pulse valve each valve can filter cleaning larger area, the overall cost saving injection system. 3. Select the submerged pulse valve with practical rather than just blowing air connection Port size: Interface size submerged pulse valve, often can not determine its cleaning function. 4. Select the submerged pulse valve production quality unity: valve manufacturing, it must be use with robots and automatic production line CNC center, to prevent the production of quality due to human processing caused by non-uniform. In a cleaning system, often due to a valve leak and cause paralysis of the entire system. Botou City Chunhui Environmental Protection Equipment Co. http://www.chinachhb.com/ Contact: Han Tong Tel: 15343174995