Cast stone humidifying machine manufacturers Cangzhou Yingjie Machinery Manufacturing

Cast stone cast stone humidifier humidifier mixer: two groups evenly spiral blade machine feeding into the host, put into the mixing tank, dry ash powder material mixing tank water from water dosing device will be forced mixing, stirring, while Material humidity specifications delivered to the discharge port. Cast stone humidification mixer mixing tube through its support frame fixed on the base on both sides, feeding the motor is fixed to the side of the hopper into a cylinder located to the lower hopper into the cylinder concentric with mixing tube and mutually connectivity, the spindle located mixing tube and into the cylinder, the main motor driving the spindle rotation, which is in progress and around the spindle shaft is fixed to the barrel auger webs in uniform stirring barrel fixedly provided with a stirring spindle stick, stirring evenly on drum set in a row intakes, inlet and water inlet pipe connected to the upper end of the mixing tube is also fixed a vibration motor, to avoid the wet uneven mixing, less prone to fly ash bonding, safe and reliable . Cast stone humidifier ready before the operation: 1) the operator must be an operating license before the operation; gray tank must check whether the objects before 2), you must start under no-load conditions; must be checked before slowdown 3) Operation Whether the lack of oil in the machine, the other parts are lubricated properly. Operating sequence: 1) transport gray car positioning, the cast stone humidifier is turned on, and sprayed water on; 2) Turn on automatic unloader cinder; 3) When the gray car transport is almost full, turn off automatic under the feeder; When the hopper is full, close the cast stone humidifier and spray water is turned off. Sales hotline: 0317-5660287 18032703761 Website: www.chuchenqipj.com