Factory direct ZSQ submersible pumping sand pump wear flushing pump

ZSQ submersible pumping sand pump, wear flushing pump flow components using the manufacture of high-chromium alloy, it has good wear resistance, free passage, suitable for transporting large sediment containing solid particles, pulp, coal slurry, gravel and other media. In addition to increasing external water pump at the bottom of a main impeller mixing impeller, you can spray the deposited sludge hit into turbulent water pump to achieve a high concentration of transport in case of the absence of auxiliary devices. Conditions of Use: 1. Power is 50Hz / 380V three-phase AC power distribution transformer capacity is 2-3 times the motor rated capacity. 2. Medium temperature not exceeding 110 ℃, does not contain flammable and explosive gases. 3. Maximum weight concentration of solid particles in the medium: 45% ash, slag was 60%. 4. Unit diving depth: not more than 20 meters, the minimum diving depth to submerge motor prevail. 5. Units in the medium work for the vertical position, the upper suspension positioning. Scope: 1. draw rivers, lakes, sea and other underwater sand. 2. draw underwater silt rivers, lakes, sea, reservoirs, ponds, power plants, etc., and sand. One year warranty / wooden packaging can be customized according to customer requirements. Tel: 13290333050 0531-55507996 QQ: 1569012795