Supply Shandong Stephen Cheung wear and corrosion resistance slime pump / ash pump / cinder pump

Features: 1. Machine to dry under the pump, motor with oil chamber sealed manner, equipped with mechanical seal, can effectively prevent the high-pressure water and impurities into the motor cavity. 2. In addition to the main impeller, there are stirring impeller, capable of sludge deposited on the bottom of the stirred into turbulence after extracted. 3. impeller and stirring impeller flow components using high hardness high chrome cast steel, wear, corrosion, sewage capacity, through a larger solid particles. 4. Motor submerged, without suction lift limit, high slag suction dredging is more thorough. 5. Overall Equipment simplified allowed with additional stirring device or injection device, easy to operate, with a total investment of unit lowered. 6. stirring impeller direct access to the deposition surface, by controlling the concentration of dive depth. In the specific gravity of the medium through the installation of auxiliary equipment, increasing media concentration. Scope: 1. draw rivers, lakes, sea and other underwater sand. 2. draw underwater silt rivers, lakes, sea, reservoirs, ponds, power plants, etc., and sand. 3. Transfer the powder slurries of various stone processing plant. The tailings transport, a variety of mine tailings, slurry, pulp, coal slurry, slag, slag processing. 5. Transfer of various aqueous slurry of various solid slurry processing job items. 6. draw caisson wells in the mud. 7. sedimentation tanks, hydropower, reservoirs, rivers, plants, caisson, mines, ponds sediment cleanup. 8. draw a variety of power plant fly ash, coal. 9. draw all kinds of diamond sand, quartz sand, slag, slag solid particles. 10. The transport of sediment, slurry, coal slurry, gravel and other media containing large solid particles. 11. The gold sand, pumping iron ore. Conditions of Use: 1. Power is 50Hz / 380V three-phase AC power distribution transformer capacity is 2-3 times the motor rated capacity. 2. Medium temperature should not exceed 60 ℃, not including the inflammable gases. 3. Media maximum weight concentration of solid particles: 45% ash, slag was 60%. 4. Unit diving depth: not more than 20 meters, the minimum diving depth to submerge motor prevail. 5. Units in the medium work for the vertical position, the upper suspension positioning.