WQ type submersible non-clog sewage pump

I. Product Overview: WQ type submersible non-clog sewage pump is the introduction of foreign advanced technology, based on the combination of domestic water pump features the successful development of the new generation of pumps, energy-saving effect is remarkable, anti-winding, non-blocking, automatic installation and automatic control and so on. In the carriage of solid particles and long fibers litter, it has a unique effect. The pump uses a unique structure of the impeller and new mechanical seal, can effectively convey contain solids and long fibers. Compared with the conventional impeller impeller, the pump impeller flow channel or double channel single form, which resembles a cross section of the same size elbow, the flow of a very good, with reasonable cochlear room, so that the pump has efficiency high impeller static and dynamic balance test, the pump no vibration during operation. Second, product characteristics: 1. Distinctive single or double blade impeller structure, greatly improving the dirt capacity, which can handle fiber material 5 times of pump diameter of about 50% of the pump diameter of solid particles. 2. Mechanical seal uses latest anticorrosive hard tungsten titanium material to enable safe more than 8000 hours of continuous operation. 3. Compact structure, small size, low noise, energy-saving effect is remarkable, easy maintenance, no need to build pumping stations, dive into the water to work, greatly reducing the project cost. 4. The pump seal oil chamber with high precision interference leakage detection sensors embedded in the stator windings of the thermal components, automatic protection of pump motor. 5. According to user needs equipped with automatic control cabinet, the pump leak, leakage overload and overtemperature automatic protection, improved product safety and reliability 6. Float switch can change according to the required level, automatic control of pump start and stop, without special care, extremely easy to use. 7. WQ series can be based on user needs equipped with dual-rail automatic coupling installation system, it is to install, easy to maintain greater, may not have to get into the sump. 8. Can in a full head, but ensure the motor is not overloaded. 9. There are two types of installation, fixed automatic coupling installation system and traveling free installation system. Three main purposes: used in chemical, petroleum, pharmaceutical, mining, paper industry, cement plants, steel mills, power plants, coal processing industry and urban sewage treatment plant drainage systems, municipal engineering, construction sites etc particles sewage, dirt, Division also used to pump clean water and corrosive media.