Botou Tianhai 3GR three screw pump

3G three screw (screw pump) for the media and the performance range: 3G three screw pump infusion body for a variety of the solid particles, liquid lubrication oils and similar non-corrosive oil, the fluid viscosity of 1.2 to 100 ° E (3.0 ~ 760cst), high-viscosity liquids may also conveyed through the heating viscosity reduction. Flow range 0.2 ~ 590m3 / h, the maximum working pressure of 100bar, the maximum temperature of 150 ℃. ● 3GR three screw (screw pump) structure: 1, the structure is simple: with a variety of structural forms, usually small flow 0.2 ~ 6.5m3 / h, pump casing and liner into one (collectively referred to as the pump), the shaft called mechanical seal. Medium flow above the pump liner is a separate part fixed to the pump body, high flow pump double suction structure made more horizontal installation, seal there are two kinds of mechanical seals and packing seal according to the different transmission media. Installation form 3GR marine pump have both horizontal and vertical, the original motivation for the AC, DC marine motors. 2, long life: 3GR three screw the active screw driven by a motor, the master and slave is no mechanical contact between the rod, and driven by the output pressure of the liquid from the bar around the axis of rotation, the master and slave between the rod, screw and Jie oil film between the bush protection, therefore minimal mechanical friction pump, called a semi-permanent life. 3, the fluid within the body 3GR three screw axially uniform motion, so the pressure pulsation, flow stability, low noise, small part due to the rotation inertia, the starting torque and low vibration. 4, 3GR three screw pump has a high suction capacity. 5, in order to ensure 3G R three screw pump, motor and piping systems security, medium flow above the screw all with a safety valve, when the pressure exceeds the set pressure of the safety valve, high pressure oil will flow back to the pump inlet mouth. Sales Hotline: 0317-8292122,8189553, fax; 0317-8188192