IH chemical centrifugal pump

I. Product Overview: IH stainless steel chemical centrifugal pump is a horizontal single-stage single-suction centrifugal pump water for the suction of liquid water and the physical and chemical properties similar to water without solid particles. It is widely used in industry and agriculture and urban drainage, fire water supply. IH-type pump according to the performance and size of the design under the ISO2858 international standards, the technical standards are closer to international standards, reached the international advanced level. It is one of the promotion of energy-saving pumps. The pump is simple structure, reliable performance, small size, light weight, corrosion resistance, low power consumption and easy maintenance. IH stainless steel chemical centrifugal wide versatility, the full range of work 140 kinds of specifications, but only four axes; the same specifications of the shaft, bearings, seals, impellers and other fasteners can swap; suspended all-Series Pumps Only four. Pump speed is divided into 2900 and 1450 rev / min two kinds. Properties are as follows: 2900 rev / min 1450 r / min maximum flow: 240 m3 / h 400 m3 / h maximum total lift: 125 m 55 m Maximum speed: 3500 rpm / min (for 60 modulated wave power, the impeller diameter All decrease) the maximum operating temperature of 160 degrees Fahrenheit deterrence allow the pump suction line pressure is the maximum working pressure 0.3MPa 1.6MPa Second, the use of: 1, suitable for urban environmental protection, construction, fire, chemical, pharmaceutical, dyestuff, printing and dyeing, brewing , electricity, electroplating, paper, petroleum, mining, equipment cooling, tanker offloading and so on. 2, for water, sea water and with acid, alkalinity of chemical liquid and general mushy slurry (medium viscosity ≤100 PCT amber, solid content up to 30% or less).