Heavy electric air lock flap cinder valve

DF (ZJ) XF-I / II Electric (hammer) airlock This valve structure characteristics and uses DF (ZJ) XF-I / II electric air lock This valve is the use of cycloid and deceleration device. Cross-start blocking gas, cinder thoroughly air lock, light weight, easy to operate, with an adjustable speed motor cinder capacity. DF (ZJ) XF-I / II hammer airlock This valve has a counterweight lever system, so that self-locking cross open air, the hammer back position, adjust the position of the weight control cinder capacity. The valves are suitable for building materials, metallurgy, chemical, power and other industries, all kinds of dust removal equipment ideals hopper discharge means mills, dryers, silos and other equipment. Key Features Temperature: In less than 150,300 Specifications: 150 * 150 800 * 600 ----- Scope: Suitable for medium dry dust-like material Yongjia Valve Co., Ltd. specializes in special main products are three-way dosing valve dumping ash vacuum pressure release valve, metallurgical Pressure relief valve, explosion venting valve, water gate hoist, shoot the door, channel gates, regulating weir gate, screw gate and a series of valves and customized non-standard valves! Welcome businessmen around to purchase! Contact Ms. Zhang 13567729609 Tel 0577-67316329 Fax: 0577-67316329 Website: http: //www.zjztfm.com QQ 783412710 Product Categories: This valve airlock hammer flap cinder valve discharging valve Supply: pneumatic bell cinder valve XH640,40,740W / X-8,4 pneumatic bell cinder valve Model: XH640X nominal diameter: 100-1000 Nominal: 0.05-0.25MPa Suitable temperature: ≤350 ℃ Medium : Dry powder, dry material XH40X-8 type, XH40W-4 type bell cinder valve rod pulling and apparatus Actuated mechanical actuators, tapered plug complete opening and closing action. Also applies to the case of automatic control and remote operation. XH40X-8 type soft sealing rubber sealing parts, this valve is used in metallurgical coal transportation control system of pulverized coal injection, XH640X-8 type sealing parts of the valve body material sealed, this valve is applied to the transportation control dust removal system. These two models co-ash valve bell is also applicable to other industrial furnace pit similar system is used. The company supplies special valves in the pneumatic bell cinder valve XH640,40,740W / X-8,4 pneumatic bell cinder valve quality assurance, welcome to consult the discussion. Disc feeder disc feeder Product is suitable for 20mm or less fine ore feeding equipment. Disc feeder by driving means, feeder body composition measurement belt conveyor and metering devices. Disc feeder is a widely used continuous volumetric feeding device is the use of the flow of materials through the rotation of the disc and scraper plate can be adjusted to the material scraped from the vessel by the feed device to apply in a variety of non-sticky and liquidity is not very good material. The main function of disc feeder disc feeder Features are provided to other devices for Material supply, use disc feeder allows material evenly into the device so that the next process can work, save labor, but also protects the performance of the equipment, extend the service life of the entire production line equipment. Disc feeder, mineral processing equipment is an indispensable accessory products. Disc feeder compact design, simple structure, easy to adjust, reliable, small amount of maintenance, low noise, the cement sector, chemical industry, power plants and other preferred system ration feeding equipment, while other industries as a non-tacky The feed material (to) feeding equipment. Disc to the mining machine is hanging structure. DB is a closed structure, dust, ash, but the conditioning operation are in a closed shell, not intuitive. DK is open structure for small dust of the material, and operation are intuitive adjustment.