Strength polyester fiber polyester fiber Fabric mine safety net plastic plastic net domestic patent products

Coal mine with a plastic guard to help network 15305387888 Products coal mine with a plastic guard to help network with high modulus, high strength polyester filament bundles woven into the substrate, the substrate surface is coated a layer of flame retardant antistatic coatings, to replace the metal mesh, plastic mesh, steel mesh, packing tape netting. The product is acid, not aging, high joint strength, long life, high strength, flame retardant, antistatic, and other functions, can be widely used roadway overhead guard, nursing help and work off the top. Coal mine with a plastic guard to help network product features soft, light weight, high tensile strength and junction, every square meter of coal mine with polyester fiber reinforced plastic net off the top only 1KG around the metal mesh of the same weight is the product of more than 10 times. Per square meter minimum tensile strength of 40KN, the maximum tensile strength can answer 1000KN, the same as their other metal mesh polyester fiber reinforced plastic mesh strength it can not be compared. Anti-acid, anti-cold, anti-corrosion, resistant to moisture, do not produce static, flame retardant, in the underground burying performance is basically the same. Face coal mine with a plastic guard to help network application in coal mine roof off guard to help protect mining, coal anchor spray roadway, temporary and permanent support of the tunnel, can be used as other mine workings, underground civil engineering. Coal mine with a plastic guard to help network common models: Performance / Specifications 40-4050-5080-80100-100120-120160-160200-200240-240 strength (kn / m) radial 405080100120160200240 405080100120160200240 zonal elongation at break (%) < 15% Grid (mm) 25.4 * 25.4 50 * 50 63 * 63 mesh (mm) 20 * 20 40 * 40 50 * 50 Width (m) width of 1-6 meters (if any special requirements may be coupled to widen to 12 m) flame retardant (s) with flame: <3 seconds flameless: <10 seconds antistatic properties (Ω) <1.0 × 109 coal mine with a plastic guard to help network special large size: Performance / Specifications 300-300400- 400600-400600-600800-8001000-1000 strength (kn / m) radial 3004006006008001000 3004004006008001000 weft elongation at break (%) <15% grid (mm) 25.4 * 25.4 50 * 50 63 * 63 mesh (mm) 20 * 2040 * 4050 * 50 Width (m) width of 1-6 meters (if any special requirements may be coupled widened to 12 meters) flame retardant (s) with flame: <3 seconds flameless: <10 sec antistatic properties (Ω) <1.0 × 109 coal mine with a plastic guard to help network transport and storage 1. Transportation 1) when handling the product, avoid using sharp utensils. During transport, avoid sharp objects or irregular objects mixed together, but also to avoid heavy compression. 2) Product sheet can stand upright, you can supine transport. The maximum number of layers stacked supine load should not exceed 8 levels. 3) products in the underground (mines) transport should be used van tub, avoid the use of U-line fork trucks, in order to avoid collision, extrusion damage. 4) products in the underground (mining) transportation, loading and unloading, should avoid sharp objects mixed, mix, avoid other heavy compression or impact. 2. Storage 1) The product should be stored at room temperature away from the fire environmental conditions. 2) The product should be stored in a dark warehouse, the product should be more than 20cm off the ground. 3) stored in a cool ventilated warehouse, to prevent direct exposure to the sun. 4) finished more than 2m away from the heat source, storage period of one year from the date of delivery within a half since. Coal mine with a plastic guard to help network Cautions 1. products in use were found to have been cut off when the ribs, you can use a weapon after local reinforcement. The same method of reinforcement for clipping and mesh connections. 2. The product shelf life is too long or save ambient temperature is too high, resulting in a large area of ??product deformation or bent ribs serious, to be suspended, and by mechanical properties testing, to confirm compliance before use. 3. Bolt roadway use, the outer end of the nut bolt tray should be greater than 2 times the size of the mesh size. Manufacturers: Taian Sunshine Fiberglass Products Co.,