To track fixation and maintenance

Fixing method to track maintenance and fixing method to track http://www.btgllj.com/dg/398.html track on the inside of both sides of the track, as required spacing (approximately 500-700mm) with M8 expansion nail or iron shot nail securely. Bottom of the track and the ground must be tightly focused, not a virtual cross the gap, to prevent the ground-track load bent. To track the basic maintenance 1, in order to prevent the deformation occurs rail track when   use in lifting to four of the same length on the rope at the same time track to get caught four lifting hole  track will be smooth lifting on Transportation . 2, will be a good cushion rail support point, to ensure that each anchor pad level   uniform force to ensure a smooth track entirely. 3, to install the respective anchor rail to rail by adjusting the horn pad is good, solid mat  professional and technical personnel will be adjusted to track qualified precision. 4, in order to track the overall deformation prevent deformation after use   scored from the earth to orbit the workpiece to  avoid artifacts caused by prolonged heavy pressure on the ground track of. 5, to track when not timely Face Wash   then coated with anti-rust oil and covered with a rust-6, to rail should be installed in ventilated, dry environment  and away from heat, corrosive gas, corrosive liquid. 7, to track implementation of a regular weekly inspection by national standards, depending on the circumstances  test cycle for 6-12 months Jinchang Seller: Li Ce Sales Hotline: 15533782220 / 0317-8305554 Online QQ: 1902025781 Sales Fax: 0317-8288689 Sales Address: Botou City Industrial Development Zone Company Email: 1902025781@qq.com Jinchang more information, please visit the website: http: //www.btgllj.com/dg/