On the knife automatic knife

On the knife use and parameters: Enables machine engraving machine knife, to a great extent the result of human actions on small poor school knife knife inaccurate, tool breakage, breakage, wear failure to timely discovery of defective products or waste produced with a small utility knife engraving machine to make defective products or waste not occur, thereby greatly improving production efficiency to achieve a fully automated production machines, no longer operational due to a variety of human waste produced by defective products or to improve processing costs and trouble . The utility is installed on the knife in a variety of axial cutting tools of various precision milling machine carving, engraving machines, machining centers, milling machines, Tang, drill bits and other detection equipment. This means all-Japanese electronic component chips rated input and output voltage DC5V- 24V ± 10%. set normally open, normally closed. useful in all domestic and control systems. (New Generation, Bao Yuan, Fanuc, Fagor, Mitsubishi, Weihong, etc.). Repeat positioning accuracy: 0.001mm tool setter type speed: 50-200mm / min design life: 300 million times the maximum diameter of the knife: 0.5mm / 20mm for the knife total height: 65mm total travel of the knife: 10mm knife default Form: NC normally closed knife voltage range: 10-30V DC for the knife rated voltage: DC24V ± 10%, 20mA (MAX) for the knife blow: Yes Protection level IP67 * 100% waterproof, oil sealing performance