Switzerland TESA altimeter TESA HITE 400700

Technical specifications: v measuring range: 415mm / 16in v accuracy (full) :( 2.5 + 4 * L) μm (L in m) v resolution (Resolution): 0.0001mm / 0.001 / 0.01mm v maximum vertical error : 10μm v Repeat accuracy: plane ± 2μm, round hole ± 3μm. Approx per charge: v measuring pressure: 1.5N ± 0.5N v output interface: with RS-232, optoelectronic coupler v maximum displacement speed: 0.5m / sv electronic measurement system: Incremental glass scale v Battery use 60 hours. v Machine weight about: 27Kg v protection factor: body IP40, IP65 v controller built air displacement means randomly attached Switzerland v SCS calibration report Key Features: 1. Ultra large number of measuring stroke 2. The accessories can be used with Micro-Hite's Accessories shared. 3. The three measurements - unidirectional - General ladder segment deviation measurement bi - circle, diameter, width measurement dash - Selection scriber scan directly using the highest circle of low 4. Unit selection - Direct Conversion (metric) mm / in 5. RS 232 data output -Opto-coupled direct connection to ensure and most advanced computer-aided quality assurance system displays - large display screen - easier to read. The reliability of data transmission, can be directly connected to the computer. Standard accessories: 1. Standard stylus fixed handle × 1 2. standard 5mm diameter probe × 1 3. Setting gauge × 1 4. rechargeable battery pack = 6V battery (with Micro-Hite same) 5. English Operating Manual × 1 6. Certificate charger × 1 × 1 7. group