PA66 nylon towline (tanks chain) manufacturer

Machine tools towline towline machine is used to protect the cable pipe tubing used. Material It is divided into two kinds of steel and aluminum towline towline and engineering plastics. According to the structure of points, there is a bridge (on the outside can see the cables, etc.) closed (outside do not see the cables, etc.). Machine towline domestic technology is now able to produce a variety of styles, but always changing. V (3) towline has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses. Structure towline (1) towline shape like tanks, chain link by the large number of units composed of freely rotating between links. (2) within the same series of towline high, outside the high, the same pitch, towline in width, bend radius R may have a different choice. (3) unit chain around the chain plate and the top and bottom cover plates, towline can open each section, easy assembly and disassembly without threading, to the cable, tubing, pipe, water pipes, etc. into the towline open the cover . (4) Also provide separate piece, the chain separated by space as needed. The basic parameters of towline (1) Material: reinforced nylon, with high pressure and tensile load, good toughness, high elasticity and abrasion resistance, flame retardant, high temperature stable performance, can be used outdoors. (2) resistance to: oil, salt, and a certain acid, alkali capacity. (3) The speed and acceleration: maximum speed of 5 m / s, the maximum acceleration up to 5 m / s (the specific speed, acceleration, as the case may be running). (4) operating life: Under normal circumstances overhead use, up to 5 million of reciprocating motion machine towline selection principles: internal height: Select the thickest a built-in cable, tubing, pipe, water pipe as a reference height, plus At least 10% of the height of the space as towline in high. If the overlap after overlap according to the actual height as the reference height. Wide: choose some thick cable, tubing, pipe, pipe, etc., and its foreign economic relations of reference as towline in width, and leave at least 10% of the width of the space. Bending radius: Select built-in cable tubing, pipe, water pipe bending radius as the maximum value of the test and left more than 10% of the space towline built-in cable, tubing, pipe, tube placement guidelines should leave the remaining 15% space for built-in cable, tubing, etc. can be free, in the radial direction of the towline no tension. Large diameter wire difference should be laid separately, weight evenly distributed. Available separators to separate when necessary. In the high-speed or high-frequency operation, we should try to make the wires apart from each other on a level and do not make it over another, the more time the cable, pipe, tubing, etc. is recommended to use separate sheet