Torque tube float level gauge works

Torque tube float level gauge works 1. Introduction: FY86T series torque tube float level community level meter, a continuous level measurement, level instrumentation interface level. A new structure, unique, long life, high temperature, high pressure, corrosion resistance, to meet the needs of emerging industrial automation and control. Installation, measurement, in full compliance with the requirements of the applicable conditions liquid level, interface level measurement instrumentation and control technology. Meet a variety of installation conditions, install the form of need. Measuring range: 300-6000 mm Accuracy class: 1.0% FSD Load capacity: 600 Ω measurement scale: mm graduation,% share of medium scale: 0.4-1.4t / m3 (specific gravity difference ≥0.15 t Power supply: 24 VDC principle: Dip in liquid float downward by gravity, buoyancy and upward composite spring force. When these three forces balance, floats on a stationary position. When the level changes, the float buoyancy suffered a corresponding change the balance was broken, causing changes in elasticity that is stretching the spring, in order to reach a new equilibrium. spring stretching it with a rigid connection of the magnet is displaced. Thus, by inner magnetic sensing element, and an indicator that it indicates the gear Level limit switch instruments to achieve the level of alarm signal based on displacement measurement principle, hanging in measuring the displacement of the barrel spring immersed in the liquid to be measured, and by the Archimedes buoyancy effect, the proportional to the mass action and displaces liquid according to high and low level, cylinder immersed at different depths, buoyancy changes, measure the spring will be extended accordingly, in order to achieve the measurement results 2. Product Image: 3 basic parameters: Measuring range: 300-6000 mm Accuracy class: 1.0% FSD Load capacity: 600 Ω measurement scale: mm graduation,% share of medium scale: 0.4-1.4 t / m3 (specific gravity difference ≥0.15 t Power supply: 24 VDC signal output: 4-20 mA Working Pressure: Standard: 4.0 MPa high-pressure type: 6.4, 10.0,16.0 MP Protection: IP65 Explosion-proof mark: Exd (ia) II CT6 4. Selection of code: If necessary, please contact Ms. Yu, Tel: 010 80487955 YJ 12.24 torque tube float level gauge works