Xenon lamp aging chamber

This product has light, rain, condensation, temperature, humidity and wind of six environmental factors, is a more comprehensive and integrated environmental testing machine can be used independently or in combination of six factors organically different types of tests. Suitable for electric and electronic products, plastic, rubber and building materials color samples to simulate daylight illumination artificial aging tests. Name Model Studio Size (mm) Power (kw) main technical parameters Remarks Xenon weathering test chamber SN-J 950 * 950 * 850 6 temperature: room temperature ~ 70 ℃ specific parameters, please contact SN-P (ordinary) 950 * 950 * 8506 temperature: room temperature ~ 70 ℃ Relative Humidity: 50 ~ 80% RH SN-P (export-oriented) 550 * 850 * 450 8 SN-B1 (ordinary) 950 * 950 * 8506 temperature: room temperature ~ 80 ℃ Relative Humidity: 50 ~ 80% RH SN-B1 (export-oriented) 550 * 850 * 450 8 SN-B2 (ordinary) 950 * 950 * 8506 temperature: room temperature ~ 80 ℃ Relative Humidity: 50 ~ 80% RH SN- B2 (export-oriented) 550 * 850 * 450 8 SN-Z1 (ordinary) 950 * 950 * 8506 temperature: room temperature ~ 80 ℃ Relative Humidity: 50 ~ 80% RH SN-Z1 (export) 550 * 850 * 450 8 SN-Z2 (ordinary) 950 * 950 * 8506 temperature: room temperature ~ 80 ℃ Relative Humidity: 50 ~ 80% RH Special Note: Our production Xenon weathering test chamber professional manufacturers, so our lighting aging test equipment relatively complete variety, can provide a variety of standard models of equipment for users to choose the company's products can basically meet the test project is all standard requirements at home and abroad, and the production of the products of the earliest and most complete manufacturers, product performance stable, reliable, it can provide two years of free packets of services to users! Our xenon lamp chamber (this is a co-production with American Equipment Company) difference and advantages and other companies xenon lamp test chamber: Xenon lamp used by the Company for the United States imported air-cooled xenon lamp, and used by other companies Common water-cooled xenon lamp different. Comparison of two xenon lamps are as follows: 1, the characteristics and shortcomings of water-cooled lamp: a, cooling water-cooled, easy to produce scale, resulting in a serious decline in radiation intensity xenon lamp, and cooling water pipes are generally connected to a rubber tube and plastic pipe, the aging xenon lamp house is easy to aging rupture, leading to aging tank leaking indoor and outdoor produce, and when xenon lamp work because of leakage may cause the lamp can not be cooled, can easily lead to tube rupture temperature, thereby increasing the cost. b, water-cooled lamp life up to 200 hours in general, the lamp does not light too early and radiant intensity attenuation to a small but can not be used. c, structure due to water circulation device, resulting in structural complexity (there are water pipes, pumps, tanks, valves, etc.), so the failure rate is very high (inside the inlet hose easy to aging), maintenance and more, add a lot of maintenance costs. d, because of its way to manually trigger lighting lamps, automatic lighting can not, so the device does not meet the requirements of the standard light-dark cycle with a gap control lighting test function (that can not simulate climatic test day and night). e, since under normal circumstances, a xenon lamp power will be used with the longer time, the emergence of a xenon lamp power continue to decay and lead to decreased radiation intensity drifts, then the device can not be achieved and the radiation intensity of a xenon lamp power compensation, it can not be guaranteed radiation intensity values ??can be stabilized at the range to meet the requirements. 2, the company imported air-cooled xenon lamp test chamber has the following advantages: a, air-cooled tubes have adjustable air flow, clean and non-polluting, high cooling efficiency, heat dissipation, etc., so the failure rate is very low, the lamp not damaged, it enables high reliability and low cost. b, due to the use of US imports of air-cooled lamp, greatly extend its life, under normal circumstances, have to ensure that the service life of more than 2,000 hours (3,000 hours or more frequently). c, due to air-cooled simple structure (only the fan, duct), easy maintenance, so the failure rate is very low, less maintenance, low maintenance costs. d, the company xenon lamps are automatically trigger lighting, space lighting function can be achieved, can achieve lighting, automatic control of lights, which can meet various requirements of the standard simulation of light during the day and night, light and dark cycle requirements. e, the Company xenon lamp xenon lamp power attenuation compensation device can be improved by adjusting the xenon lamp power, increasing radiation intensity, so as to ensure stable and reliable light radiation intensity can be controlled within a certain range, to meet a variety of standards. Address: No.3 clear On Road Huaian Contact: Zhang Zip: 223002 Tel: 0517-86226179 0517-86228629 Sales Hotline: 0517-83952370 0517-83950851 Fax: 0517-83979328 Mobile: (0) 18952389966 Website: http: / /www.jshazy.com http://www.hazysy.com mail: hazy998@139.com master@jshazy.com