The amount of iron instrument

Instrument Description: British Provincetown Emperor Group launched a whole new generation of analytical testing CALDEE series PQ-1A automatic iron instrument, which uses a variety of proprietary technologies and precise algorithm, with very high sensitivity, accuracy and repeatability, in a few seconds can be measured accurately in the content of various oil samples ferromagnetic metal grains, the measurement results directly to the actual concentration value indicates a great convenience to the user of the data interpretation and analysis. CALDEE series PQ-1A automatic iron meter represents the highest level and direction of the iron content measured, scientific applications CALDEE iron meter can prevent costly downtime and additional mechanical losses, for the user to save a lot of maintenance costs and bring sustained gains. Measuring principle: CALDEE series PQ-1A automatic iron meter built a special sensitive sensor electromagnetic coil and patented technology. When a sample is placed in a magnetic field, the oil in the iron particles causes a change in the magnetic field signal intensity is proportional to the size and number of samples of electromagnetic induction in iron content and has a good correlation. Therefore, the signal sensor will accurately record the degree of enhancement, the system processor can use advanced algorithms to calculate the actual concentration of the solution in milligrams per gram or ppm value representation. Features: Accuracy: As the instrument has a high signal to noise ratio, and uses a lot of advanced and unique measures to effectively remove the oil matrix interference, non-ferromagnetic and non-metallic particles, and temperature measurement readings Therefore, the iron content of the instrument on the oil detection limit can reach 1ppm, far more than other types of iron content detection equipment, and has a high measurement repeatability, which can be more early detection of abnormal wear of equipment. Measuring speed: the instrument from the injector to generate measurement data takes only a few seconds, so you can easily cope with a large amount of sample cases. Operating module: Instrument operation very simple and only takes a few minutes you can easily grasp, without professional training. Environmental requirements: Compact equipment structure, small size, strong vibration, suitable for any harsh field environment for rapid detection. Applicable Sample: analyze various mineral oils, synthetic oils, hydraulic oil, gear oil and grease content of iron in the sample class. Application: At present CALDEE series PQ-1A automatic iron meter has been in defense, aerospace, shipbuilding, electric power, petrochemical, metallurgy, mining, road transportation and other areas of the countries was widely used. Safety and environmental protection: CALDEE automatic PQ-1A iron meter without sample preparation, does not need any cleaning solvent, use of safety and environmental protection, the user will not cause any health damage performance parameters: measurement sensitivity: the lowest to 0.1 mg \ g maximum concentration range : 30,000 mg \ g iron size: more than 5 micron sample volume: every 2 ~ 5ml Working temperature: 0-55 degrees Power: 220V ± 15% 50Hz or portable power Keywords: the amount of iron instrument, iron meter, automatic iron meter, automatic meter the amount of iron, the iron content analyzer, spectrum analysis of iron, iron spectrum direct reading, Ferrograph