128D wire testing machine

128D low-voltage wire testing machine features: 1.128D wire tester mainly for a variety of electronic, electrical wire and connector testing needs and design. 2.128D microcomputer program control, testing, measured in a continuous way Zhen tested, not only accurate and easy to operate, easy to use test. 3 and has a variety of test functions are available, so that the test speed, any wire can be found in a very short time to complete the necessary tests. 4. ten million kinds of wires and connectors, 128D for a variety of test conditions and the actual condition of consideration, widely used in computers, communications, medical, home appliances, electrical wiring and other tests. 5. This machine is suitable for computer wire factory, such as welding wire, wire forming, cable, various types of terminals, IC sockets and other types of semi-finished products of wire testing. 6. In addition to the production line is suitable for a large number of tests, but also for engineering design, quality control and maintenance of the feed sector. Test Specification: 1. Test Points: 64 points single-ended test, double test 128 points, and can be expanded to 256 points. 2. Sensitivity: Short circuit <500Ω interruption> 500Ω Insulation: 1K, 100K, 200K, 500K, 1M, 2M, 5M optional. 3. break test: wire length of more than 30cm or more correctly detect the disconnection direction. The single-ended test: wire length of more than can automatically detect short-circuit, open circuit, poor insulation and other conditions, and more than 30cm. 5. Test voltage: DC5V 6. Setting Mode: Reboot or standard data must be read again after a power failure. 7. Enter: automatic read standard wire material. 8.LCD Display: 20 characters X2 line, backlit LCD 9. Test results show: audible indication 10. Power: AC220V ± 10%, 50HZ 11. Power: ≤8W 12. Volume: 270 × 275 × 105mm3 13. Weight: 5kg