NC extruder

CNC extrusion machine, the technical parameters: Second, the device Description: This series extruder is our self-developed products, the introduction of new models PLC microcomputer control, the State Patent Office has issued a patent certificate, the tonnage of the machine type product type is mainly used as follows: (a) VT-250T ~ 350T extruder: (1) pewter wire (squeeze specifications φ5-φ16mm); a, solder wire: lead levels can squeeze 10-99.95 % of pewter b, squeezable single and three-core solder wire rosin; (2) Lead-free solder wire (squeeze specifications φ5-φ16mm) a, tin-copper lead-free solder wire; b, tin-silver lead-free solder wire; c, tin-silver-copper lead-free solder lead-free solder wire tin and zinc (Zn containing not more than 25%); d, more than can be squeezed into a single-core solder wire and three-rosin core solder wire, etc; (3) lead-free solder bar (to be configured cutting machine) and (ii) VT-500T extruder: (1) Lead-free solder wire (squeeze specifications φ5-φ16mm) a tin-copper lead-free solder wire; b.. tin-silver lead-free solder wire;. c tin-silver-copper lead-free solder tin;. d above solder can be squeezed into a single and three-core and other rosin solder;. e tin zinc alloy wire (including Zn does not exceed 50 %); (2) Lead anode rod (need to configure the anode rod cutter): This series of extruders from mechanical systems, hydraulic systems, pneumatic systems, heating systems, control systems of five parts. Our success is absorbing foreign advanced technology, independent research and development of an advanced horizontal extrusion machines, time-saving, labor-saving, low power consumption, stable performance. Extruder using a plunger master cylinder composite picture cylinder structure, successfully absorb the most advanced hydraulic speed control technology to ensure the safety of the hydraulic system. 1, the master cylinder: the ram cylinder (German technology), working pressure error (0.002KG) has a powerful constant speed and stability characteristics of the hydraulic system, to protect metal and flux flow extrusion stability. 2, built-in sub-cylinder: a rapid oil-filled, reducing idling time, quickly reaches its operating pressure, improve efficiency function. Third, the device features: 1, the extrusion machine adopts microcomputer PLC control, product requirements process parameters to be set and modified by a touch screen (HMI) operation, greatly improving the mechanical properties of precision and automation, simple operation convenience. Operation technician parameters can be stored for different products via the touch screen to the PLC where the job, just select the category to set a good production process automation, enterprise solution for training hand-cooked troubles. 2, the control loop is DC24V, safer for personnel and equipment. 3, using precision EC10-4TC module temperature control system, more precise control of the heating temperature required for production, temperature error of only ± 10 ℃, thereby enhancing the stability of product quality, at the same time, you can set four timer switch , with advance preheating function, so that employees can feel free to work at work. 4, microcomputer automatic fault alarm settings and diagnostic functions, when the mechanical failure, can quickly identify root causes of failure by PLC, greatly reducing maintenance time and improve production efficiency. 5, imported programmable controller, the mechanical operation of a more stable, long service life.