Copper wire drawing machine drawing machine

Application of copper wire drawing machine drawing machine: mainly with cut copper machine (in which one end of the stator copper cut off) together in Motor factory unqualified stator magnet wire and steel for recycling, but also a number of specialized recycling machine demolition Factory solution is widely used in the recovery for the washing machine motor, air conditioning compressors copper also many applications. Copper wire drawing machine drawing machine with hydraulic drive, in the horizontal direction have a longer stroke hydraulic cylinders, pliers structure is fixed on this hydraulic cylinder and a hydraulic cylinder to follow along left and right movement under the control of foot switch; installation on lift structure Two drum-type structure for the fixed stator to facilitate ease of rotation of the stator along the tumbling, lifts the structure also uses a hydraulic cylinder, and the use of chain structure to achieve move up and down in the uplink and downlink control switch button to different specifications applicable fixed stator. Copper wire drawing machine drawing machine operation are: first stator supported on the support columns used by the cut copper positioning plate positioned on the stator, through which a foot switch control cutter cut copper stator coil; and The stator cut after cut on the pull lifting platform copper machine manually switch control motor stator positioned to rise to pull the copper plate at the drawing board to the stator copper positioning the limit, and then through another foot switch control Pull clamp jaw to bite copper coil, copper coil inside pulled out from the stator, efficient completion of the dismantling of the stator, the user can recover copper coil and the stator core according to the actual situation. Drawing machine drawing machine with high copper recovery efficiency, a huge economic benefits, dismantling efficiency of a machine is worth several people dismantling efficiency, save time and effort, (such as removing the stator pole at one end of an ordinary 2.2kw4 All copper, probably need 12-18 seconds, without the need for Y18.5 two-pole stator with fire, just pull copper wire three times, you can pull out all the copper, but essentially the same type of steel, copper daily output up to 1 ton!). Copper wire drawing machine drawing machine table can be raised and lowered according to different specifications of the stator, flexibility strong; the work process first tangent good motor stator fixed to the rod above the table with a two-cylinder structure by foot Tap switch control will move to the vicinity of the stator copper vise clamping section copper wire, copper wire and pliers away from the stator in the stator can be removed all the copper wire by another foot switch control, high recovery efficiency, operation is very simple . For details, see: http: //www.ybddj.com/yyltj/lsjltj.html http://www.tzlsjd.com/djsb/lsjltj.html http://www.gddzq.com/djsb/lsjltj.html http : //www.zdskcc.com/djsb/lsjltj.html http://www.feibiaoshebei.com/feijiudianxianchulishebei/lsjltj.html