Supply skinned fighting machine - Qingdao fine exhibition Electrical and Mechanical Technology

Air stripping playing computer models based on this wire stripping and crimping of coherent main host is pneumatically driven, no conventional clutch mechanized operation delay and failure to simplify internal mechanical parts, reducing wear and replace mechanical parts, torque, vibration, high stability, providing ultra-quiet working environment. Stripping unit using cylinder drive, the machine is designed with automatic skinning, manual and other functions, skinned and cut cylinder depth manner. The machine can adjust the standby time after the demand of visual wires and terminals to adjust the time terminals riveting return of peeling seat. Off dander specially designed with strippers, blown materials absorb easily understood exclude other devices. Power: 220V50 / 60HZ single-phase 1-PHASE Motor: terminal machine servo motor AC220V550W, stripping section 40W stepping motor control: Automatic skinned skinned individual terminals and stripping section (two kinds) Time: free to adjust the volume: XYL- C3-1.5A (350 * 340 * 650) XYL-C3-1.5 (400 * 400 * 480) Weight: XYL-C3-1.5A (85KG) XYL-C3-1.5 (88KG) capacity: 1.5T stroke: 30MM Stripping Length: 2-6mm wire size: UL1007AWG # 18-AWG # 32 Air pressure: 5kgf / cm-8kgf / cm (clean air dryer) mechanical stripping of the aircraft is playing computer wire stripping and crimping of coherent main Host is a servo motor drive, no conventional clutch mechanized operation delay and failure to simplify internal mechanical parts, reducing wear and replace mechanical parts, torque, vibration, high stability, providing ultra-quiet working environment. Stripping unit driven by a stepping motor, the use of the motor can instantly start to save power and high efficiency. The machine is designed with automatic skinning, inching, and automatic back function using cam manner peeling and cutting depth. The machine can adjust the standby time after the demand of visual wires and terminals to adjust the time terminals riveting return of peeling seat. Off dander specially designed with strippers, blown materials absorb easily understood exclude other devices. Power: 220V50 / 60HZ single-phase 1-PHASE Motor: terminal machine servo motor AC220V550W, stripping section 40W stepping motor control: Automatic skinned skinned individual terminals and stripping section (two kinds) Time: free to adjust the volume: JX- C3-1.8A (350 * 340 * 650) JX-C3-1.8 (400 * 400 * 480) Weight: JX-C3-1.8A (85KG) JX-C3-1.8 (88KG) capacity: 1.8T stroke: 30MM Stripping Length: 2-6mm wire size: UL1007AWG # 18-AWG # 32 Air pressure: 5kgf / cm-8kgf / cm (clean air dryer)