Manufacturers supply high-speed stranding machine stranding electrical and mechanical wire stranding machine Dongguan

 500P high-speed stranding machine Main technical parameters: 1, use: all kinds of bare copper wire or tinned copper wire, copper clad steel, copper clad aluminum alloy wire, etc. Stranded or concentric cutter; 2, actinomycetes way: Single head passive discharge line 3 to line diameter: φ0.0.08 ~ φ0.45mm 4, twisted cross-sectional area: 0.035 ~ 2.5mmsq 5, closing line reel: MAX DIN500 6, maximum speed stranding: 3000rpm / 6000TPM; 7, drive motor: 7.5KWAC 8, twisted away from the range: 4.22 ~ 39.64mm (standard 28 are section) 9, the upper and lower shaft modes: manual hydraulic lift. 10, cable mode: light pole screw cable, row width, row spacing can be adjusted. 11. Noise: ≤85dB (A) 12, up tension control: magnetic clutch (new) 256 automatic controls to ensure full plate empty plate to the closing line 13 consistent tension, brake: electromagnetic brake, internal and external disconnection , automatic brake control off shares. 14, the device center height: 750mm 15, bows: After a balancing test of the steel bows minimal vibration during high-speed rotation, and the use of ceramic porcelain eyes for balance over the line 16, the bearing cooling and lubrication way: through the tank oil lubrication. More suitable for high-speed operation. 17, traction: by changing the active traction wheel to change the pitch length, no open-gear, all transmission by timing belt. Traction wheel chrome plated for long life. 18, stranding direction: left or right (S or Z) set free. 19, Dimensions: L2500 * W1200 * 1300mm 20, weight: about 2200KG B, 500P high-speed stranding machines for constituting performance analysis: 1, the body structure: 1-1, Material: SS41 1-2, Structure: body made of iron welding noodle forming, annealing, eliminate internal stress again the precision boring, reaming complete one. 2, the axis: 2-1, Material: # 45 steel 2-2, accuracy: Axial quenched HPC25 ~ 27, to ensure the elimination of internal stress, increase rigidity, with at work are milled to ensure concentricity with the real roundness balance. 3, the winding shaft dimensions: Diameter 500mmφ Unit: mm outer diameter (OD) Diameter (ID) outer width (OW) wide (IW) aperture 500,218,310,290,704, cable systems: 4-1, bearing type cable, cable stability, response speed 4-2, row width, row spacing adjustable 5, the lower shaft of the take-up shaft means: 5-1, no top pin fixed spool shaft, a hydraulic lift for bobbin 5-2 up and down the shaft, fully enclosed safety cover, a transparent pressure window in order to observe the take-up and cable condition 6, Power: Main motor: 7.5KW AC inverter control Madagascar 7, broken Control: contact manner , inside and outside the disconnection control