Linen washing equipment

Note industrial washing machine industrial washing machine installation considerations: 1. Determine the position when the machine is installed, you should consider transport corridors, water and sewer steam into position. 2. The machine should be installed on a solid foundation. 3. Required level meter to check the machine's horizontal position when the machine is installed. Note the use of industrial washing machine: 1. Washing plush, wool fabrics, fine chemical fiber material, socks, gauze, bandages, etc., should be placed in a gauze bag of laundry. 2. After locking the drum must be turned on before, to avoid accidents. 3. Do not the sun or in the laundry next to stove. 4. For safety, the control cabinet and the motor must be grounded. Industrial washing instructions 1. Laundry to be put into a tumbler cabin, locking the drum door and then the door closed outer cylinder. (Note: Add clothing should be appropriate, not too much or too little, so as not to affect the quality of washing efficiency and washing.) 2. First open the valve, when the water in place, and then open steam valve and valve is closed when the water temperature reaches the desired temperature, the steam valve is closed. (Washed cotton water temperature is 60-70 ℃; washing rayon, silk 30-40 ℃.) 3. Detergent, washing powder generally 20-25 grams per thousand gram. 4. Turn on the power, select the washing time, the selection switch to run the file, the machine starts, running washing. 5. After washing, sewage release, hand-held simply open the valve, sewage discharge, and then close the valve. 6. Release water to wash, general cleaning 1-3 times, each time for about 1-10 minutes, until the rinse washing. 7. Cleaning, drainage and stops. So when no external cylinder drum door door door switch to the selected file, you can jog to positive. 8. Cut off the power, the power light goes out before the door take clothes. Rotating door open, push the safety bolt to shore open the drum door and remove the laundry.