Supply steel shot blasting machine

Steel pretreatment line consists of the traverse feeding mechanism, the input roller, preheating chamber, shot blasting machine, the transition roller, painting machine, drying room, runout, traverse cutting mechanism, dust removal system, paint fog treatment systems, electrical components. Roller: full range of features traverse feeding mechanism, the input roller, roller transition, indoor roller, output roller, sliding under the feeding mechanism, the system uses a frequency control, achieve the purpose of conveying the workpiece. Preheat: The device has far infrared radiant electric, steam, gas and heating oil, etc., the steel shot blasting before preheat temperature reached 40-70 ℃. Preheat is a good way to remove the ice, the cold and wet. Shot Blasting Machine: The machine uses multiple advanced and efficient shot blasting, shot out of the dense projectile hit scraping the surface will rust and other dirt swept away, get some rough and smooth surface, improve the film and the workpiece surface adhesion. Painting: The system consists of spray booth, paint up and down the car, the transmission mechanism, altimeter system, width measuring system, gas control system, high pressure airless spray pump and pipeline integration. Drying: drying room and spray chamber is connected through the workpiece after painting and drying in the drying indoors by the plate chain conveyor, ensuring the integrity of the film surface of the workpiece to reach the film index requirements. Mist treatment: The system can be divided into dry or wet mist treatment, aerosol altitude emissions after treatment, the concentration of organic solvent gas emissions triphenyl meet the national environmental emission standards. Technical Specifications: Specifications Plate width 1000-5000mm length 3500-16500mm thickness 1.5--120mm speed 0.5-6m / min H-beam 355 × 305 × 16500 600 × 190 × 16500 (MAX) passline Fl + 800MM film thickness 15-25