Baiyun Jie Ba BF502 wet and dry vacuum cleaner industrial vacuum cleaner 2000W

Routine maintenance should be noted: 1. Timely clean up debris bucket and each suction accessory, dust grid dust bag clean after each job, check there is no perforation or leak, prohibited the use of non-dry dust dust bag 2 grid. Check the power cord and plug is damaged after use of the power coil is wound into a bundle hanging hook 3. The cover is placed on the head after absorbing work completion inspection or debris clogging the air inlet, or the need for clean-up. Check buoys without damage when using the machine need gently, not external impact of mobility 5. Clean the machine, wipe it with a damp cloth or neutral detergent water 4. Host header is strictly prohibited immersed in water cleaning, do not use gasoline, bananas, water and other corrosive cleaning agents, otherwise it will lead to shell cracking. 6. Do not make the machine work long hours in a state of continuous working time, please control within two hours, otherwise it will affect the life of the machine. 7. Long-term use of vacuum suction machine When, due to clogging of the filter mesh so that the suction decline. To prevent suction decline, should be regularly cleaned with water and a bag filter, washed and then dried in the shade to use, you can restore the suction. 8. If the host fever, issued a burning smell, or abnormal vibration and noise, should be promptly repaired Do not reluctant to use 9. hoses do not come off frequently go off, do not over-stretch and bend suction vacuum suction machine check: 1. How to detect no suction: a first barrel body parts and dispose of the Quartet mouth On. Is not fitting. 2. start machinery, hand on mouth Quartet (normal is able to feel a strong suction), if no suction to check the barrels there is no leak, damaging the barrels apron, dust grid congestion, motor aging, floating wave blockage suction outlet. After replacement can be found. 3. If it is detected that there is suction fittings for leaks, cracks, damage. Accessories from short joints, hoses, long joints, pipes, dust Pa sequentially fitted with suction and then check it was found after his replacement can be no suction vacuum suction machine Cause: 1. all mechanical work Problems can not be avoided is the wear and tear, a long time will be aging, suction machines as good as new, of course, all companies are trying to do. 2. machinery in factories and businesses, because there is no hand to clean up a long time to plug the pores dust grid 3. parts when maintenance is not good, appear hose, the Quartet mouth, pipe, fittings and other wear and tear, pores. These are to have a great contact suction. The encounter some of the more in some uneven ground and carpets or weight or disaster smoke, then also need strong suction. 5. Of course suction power, more efficient, saving more time, cleaners can improve work efficiency. 6. some special objects, such as cement, flour or sticky stuff then claim to even greater suction vacuum suction machine 7. When vacuuming be sure to confirm whether the filter is installed, if it is wet and dry vacuum cleaner when the suction filter should be removed. Vacuum suction machine by mechanical power, the power of the filtered board, power switch driving motor rotates at high speed rotation of the fan blades, high speed exhaust air, and the air blower vacuum the front part of not following supplementary air blower, causing internal machine instantaneous vacuum, and external negative pressure difference. machine in the role of negative pressure difference, dusty air inhaled through dust device (dust loading / dust grid) filter, clean exhaust air