Factory Direct glass steel cooling towers, cooling tower accessories, cooling tower fill

FRP cooling tower corrosion resistance, high strength, light weight, small size, small footprint, attractive and durable, and the transportation, installation and maintenance are more convenient. It has been widely used in various sectors of the national economy, for air conditioning, refrigeration, air compressor station, furnace and condensing technology and other cooling water system is particularly appropriate. Circular counter-flow cooling tower using countercurrent gas heat exchange technology, using high-quality modified PVC packing wave plate to diffuse Drenching Area; by rotating water, to achieve a uniform water distribution, enhance the cooling effect, it more reliable, durable, easy to assemble. Structure (1) tower: type line is reasonable, steady stream, excellent material, colorful inner surface of gel coat resin comprising an anti-UV agents, anti-aging, high strength, light weight, corrosion resistance. Under the tower according to the order requirements, it can be equipped with overflow, sewage, water supply automatically, by direct suction here, eliminating the need for cooling pond, fitted with noise canceling muffler pad, effectively reducing the sound of dripping water. (2) packing: use of modified PVC wave plate, to be added to the ribs, the redistribution of water capacity, low resistance, good thermal performance, high temperature of 70 degrees, low temperature -50 degrees, flame retardant. (3) rotating water distributor and water distributor: equipped with stainless steel ball bearings, flexible and reliable operation, head low, uniform water distribution, water pipes made of aluminum or fiberglass cloth made of the pipe installation water collection plate, to overcome the floating water phenomenon. (4) fan: Low noise produced by the Department of Engineering Mechanics, Tsinghua University, according to the series of cooling tower design parameters, high efficiency fan, aluminum or fiberglass board airfoil blades, low noise, high efficiency. (5) motor: The Dept on the basis of Y-series installation size, the low-noise energy-saving motors for cooling tower design, sealing waterproof performance, high temperature, high efficiency, low noise. (6) Deceleration device: a polyester fiber reinforced neoprene belt drive power, high temperature, high efficiency, water does not stretch to overcome the slippage, the noise is small. (7) absorption facility: ultra low noise cooling towers in outside air intake increases the shield with sound-absorbing material, and equipped with sound-absorbing gate in the upper and lower parts, in order to achieve maximum noise reduction. On the tower outlet installed shielding and sound-absorbing gate bell with sound-absorbing materials, reducing the fan and motor noise coming out. (8) into the windshield: glazed steel louvres reduce floating water, air resistance is small, especially for the northern region and throughout the year we will need to use a cooling tower units. (9) Stent: All fans, fillers, into the windshield, tower, etc. Fabricated steel bracket, galvanized or painted corrosion. Fasteners are galvanized or stainless steel bolts.