FIG full set of equipment production of ceramic equipment Guyuan ceramic equipment

Ceramic sludge is sludge as the main raw material, adding an appropriate amount of materials, through a ball, roasting. Preparation sludge ceramic technology at home and abroad in the near future start of the study, the current applications mainly in the sludge as a ceramic firing organic additives, use less, only about 10%, more than much-needed process conditions and ingredients Optimization. Principle of sludge on the preparation of ceramic burning ceramic inflation, many experts believe that its raw materials shall meet the following two conditions to produce expansion: ① It should have a certain chemical composition, and a certain amount of aid from Sio2 and Al2o3 melt flux effect, so that the material is sufficiently viscous at high temperatures to produce the melt, to be able to wrap the gas voids. ② raw materials should contain the liberation of the gas in the material reaches the melting temperature of hours, or substances react with other substances in the gas release. These two conditions are mainly determined by the chemical composition and mineral composition of raw materials. Since the sludge is rich in organic matter, the heating up process will react to produce gases (mainly carbon dioxide, water, hydrogen, carbon monoxide, methane, sulfur dioxide, etc.), to meet one of the conditions described above, but not the inorganic component of sludge Expansion meet burn requirements, so we need to adjust the composition of the raw material, add some substance, so as to meet the conditions, the use of shale powder as a component and sludge mixed with ceramic firing. Light Shale filter using natural rock - shale as raw materials, high temperature roasting refining. Non-toxic, tasteless, compression wear, corrosion resistance, and has good adsorption properties and strength for the purification treatment of various types of water quality. Also for potted flowers soilless cultivation, its light weight, pressure, heat, frost, shock, radiation, etc. can also be used as building energy-saving materials. Our company has the production of ceramic equipment, ceramic production line design extensive experience, ceramic sand production of raw materials is less demanding, almost everywhere, such as: clay, slate, mudstone, shale, coal gangue, fly ash, Even industrial solid waste sludge and so can be used as raw material ceramic sand. Ceramic sand production line based on the use of the type and characteristics of raw materials, production processes are the following (1) to clay and clay as raw materials, plastic production process, the process is: clay -> plastics, homogenized -> to roll granulation -> Roasting -> Cooling -> ceramic shelf (2) fly ash or other powder as raw material, the mud into a ball technology, ceramic sand production line whose process is: Fly -> Mixed uniform of -> ceramic pot granulation -> Roasting -> Cooling -> Finished (3) shale, shale and coal waste as raw material, ceramic sand production line into a ball grinding process, the process is: Page Rock -> drying -> grinding -> Pre-wet -> ceramic pot granulation -> Roasting -> Cooling ->