Supply of vacuum suction cups, vacuum cups imported special wholesale, thin silicone vacuum cups

Supply of vacuum suction cups, vacuum cups imported special wholesale silicone sucker vacuum suction cups thin rubber material made, because it is, to draw down the workpiece or workpiece will not cause any damage. The hook-type spreader and spreader cable will not work; steel, glass, plastic, cement and wood products can be sucked into operation, and one by one from the stack of sheets reclaimer, high efficiency; in some industries, particularly stringent requirements of the workpiece surface, only with a vacuum chuck. However, there is no vacuum chuck suction, the workpiece can not suck grinding. The failure occurs, first check the power meter with a universal measuring three-phase power supply voltages, such as power supply voltage is normal, and then check whether the fuse blown phenomenon. Common fault when the fuse blows, the line is disconnected, so that no suction vacuum suction. Blown fuse is short-circuited due to the rectifier, rectifier transformer secondary flows make a lot of short-circuit current, causing the fuses. In addition, check the rectifier output load voltage as normal, but after sucker connected, the output voltage drop is not, no suction vacuum suction cups, under the current relay movements, then the sucker magnetic coil circuit or plug due to poor contact or disconnection. Undercurrent fault may have caused the relay coil is disconnected. Dealing with failure, use universal voltage meter measured points, found fault original, replacement or repair, you can troubleshoot. Will cause no suction vacuum suction vacuum suction does not work, so it does not understand the reason for suction is necessary. Corporate website: http: //www.ty-xeno.com http://www.wermis.com/ Phone: 0769-89338127 Fax: 0769-82287821 Mobile: 15989930742 Long S Address: Dongguan City, Guangdong Province night side road Nami Feng Business Building, second floor