Steel towline

Drake machine tool accessories production TLG-type steel towline, plastic towline can carry a similar quantity, heavy cables and tubing, free mount (allowing no support wheels) large length, the support plate to follow customer needs production, applicable to machine tools, mobile machinery, bending radius of 155 -. 655mm chain plate height of 55 - 155mm, can be arbitrarily chosen. TLG-type steel towline its use travel up to 45 meters, suitable for all transmission mode. Free to lengthen and shorten. In addition, changing the bending radius can be obtained by changing the pin. Towline support plate width of 155mm to 855mm, the amount of space between the hole and the hole is highly 5mm chain plate, which is the height of the support plate is determined by the maximum diameter of the cable, when the machine is running the maximum, as the towline The width of more than 355mm, for stability reasons when the towline is longer than 4m, should consider options to increase the size of the towline One. And other fixed steel towline towline machine position can be selected according to the situation. Fixed angle can be placed in the inner periphery of the peripheral or towline or external, in general, the coupling part in the towline, and the outer circumference. Bending radius according to the maximum diameter of the cable selection and should reach 15 times the cable diameter. 155 -655mm bending radius can be selected according to the given table, a small stroke may correspond to select a smaller radius. Towline length = 1/3 +5 stroke bend radius, this only applies when the fixed link is at the midpoint of the stroke of Drake machine tool accessories URL:. Www.ysdeli.com or www.delijcfj.com www.delijc. com free Phone: 4000825826 Mobile: 13920637737