Jianyu 860-910 Color tile press

860/910 type double tile press machine will be two models are a perfect combination, reasonable structure, beautiful appearance. It has a floor space saving, simple operation, especially for small venues and on-site construction of customers. It consists of feed import platform, forming the host, forming cutting device, hydraulic station, computer control system composed of several parts. Simple conversion operation on the lower, just by switching button on the cabinet to convert each layer separately control, power can be controlled separately for each layer through a clutch. Optional equipment ordinary discharge machine, hydraulic discharge machine. Upper and lower models according to customer requirements. Double combination tile press debugging method, before the first tile press, after two corners line up the shaft end of the agreement in the end from the large amount of rack height, and then discharged to the last row from the first, to find a line straightened, Check the lower shaft is in a straight line, the lower shaft left and right sides into a level. 2, the tile press first row and the last row to find a good center, then tighten the lock nut on both sides, in front of the center in the middle rounds, after a good pull in a straight line, the upper and lower shaft gap adjusted, on You can adjust the machine along a straight line. 3, debugging method tile press platen deviation, such as the right running board, pad left corner (feed rack), or fall to the right of the bottom level (the first of several axis deviation Poor several shaft bottom level, with the bottom of the shaft axis whereabouts ) Automatic double tile press technical parameter length × width × height: 5800mm × 1300mm × 1400mm large frame material: 250H steel molding axis: Diameter 70mm 45 # quenched forming wheel: Material 45 # forged hard chromium plating Transmission : sprockets, chains Motor: 3KW Forming Rows: 860-11 row 910-9 row automatic computer and Cutting Systems: Pump Station Motor: 3KW four Cut Die: Gr12 Forming speed: 8-10m / min suppress thickness : 0.2-0.7mm pressing width: 1000mm tile press tile press equipment c steel equipment c steel molding equipment - Jianyu pressure watts Factory http://www.yawaji5188.com