Glass vacuum suction crane

Glass suction lift is widely used in handling hollow glass, glass, glass walls, glass processing, solar photovoltaic glass industry, it is not only simple, smooth handling, positioning accuracy and other characteristics, can also minimize the operator's labor strength, help to improve production efficiency, reduce production costs. The device belongs to the lifting equipment, improper use or maintenance may be an accident, you must read the instructions carefully before use. In this device, the operation appears abnormal, when the damage or loss of parts, you should ask the company to seek advice or home repair service by our professional maintenance personnel, do not disassemble. The user must pay special attention to "note" appears in this specification. Disclaimer: For all the consequences of failure to adhere to this specification result, the Company will not assume any responsibility. First, the technical indicators project value maximum load (including the weight of the jig and operating handle, etc.) 300Kg supply pressure 0.5MPa ~ 0.8MPa 1MPa maximum test voltage value control mode dual-pressure control (with load, no load) operation manual off valve turning radius 3000mm lift height 1400mm boom slewing angle of 270 degrees of the weight is about 500Kg Second, the structure and the basic principles of glass suction crane is a column, cylinder, vacuum suction device, gas and other components. Column part as follows: it is welded uprights, KBK track and cylinder welded components. Wherein the welding column and KBK welded rail are grouped together by bearing and pin. Rotatable about an axis 270 degrees. Uppermost cylinder is positioning cylinder. Its role is to do is to use it when the device to lock the arm to locate and somewhere. Avoid suction device around shaking the arm under the beam. www.sdcslj.com www.shangpiantai.com www.fanbantai.com www.jiajiaolu.com