Flue machine manufacturer

Flue machine use: 1, open the machine, inside and outside moldings contact surface coat of oil in order to facilitate the release. 2, on the lap around the periphery of the inner mold mesh or steel mesh. 3, the mixed mortar into the gap between the inner and outer membrane until it fills; start vibrating pumps at the same site and gradually add the mortar, closed vibration pump cement mortar to be stationary. Internal heating, accelerate cement setting time. 4, until the appearance of the cement began releasing reaches a certain hardness, the mold is now closing the left and right, then up and down both sides of its travel limit switch. 5, removal direction nudge easily releasing cement products, cement products, small carts to be transported to the dry zone, the mechanism can be molded cement flue pipe. Reset the mold up and down and respectively the left and right after the release. Hongyuan flue machine technical parameters Dimensions 410 * 80 * 120cm vibration mode vibrator plate vibrator wing power 1.5kw Weight 1600kg I plant flue plate thickness specifications of the standard length standard width 1.0-1.2cm 25cm 30cm 1.0 -1.2cm 30cm 35cm 1.0-1.2cm 30cm 40cm 1.2-1.5cm 35cm 40cm 1.2-1.5cm 35cm 40cm 1.2-1.5cm 35cm 50cm 1.5-2.0cm 40cm 50cm 1.5-2.0cm 45cm 55cm within the model number can be customized according to customer demand for processing ! Welcome to the new and old customers to negotiate! Flue products costing :( for reference only) 1, raw materials: cement, fiber mesh material, sand, other composite materials. 2, analysis of specifications according to specifications :( 1-12 floor pumping heavy volume as the standard, three meters storey house for example) (1), high: 250mm, Width: 300mm, length:. 3000mm; (2), the wall thickness : 12mm; 3, the cost of materials costs: (1) Cement: 20kg (380 yuan / ton = 38kg) 7.6 yuan / m X3 m; (2), a fiber mesh material: 6 meters (6 million); (3) , sand (wet sand): 40 kg (approximately 2 million); and (4) other composites; 4, labor costs: (1) labor costs by 40 yuan / day, 8 / person / day, its labor costs 5 yuan / piece; 5, management fees Other: 2 yuan / m; Based on the above cost analysis 3 m / layer at a cost of 22.6 yuan, or 7.6 yuan / m. Eight regular size cement flue machine: 25 × 30cm 30 × 35cm 30 × 40cm 35 × 40cm 35 × 45cm 35 × 50cm 40 × 50cm 45 × 55cm