Cold welding

Jie Lite JLT-5188KT type cold welding cold welding using leading technology, specifically for blisters, pores, cracks, wear, scratch and damage the inside to be repaired, the brightness after the repair, the hardness by hardness testing. Welcome to the site visit or send samples into small pieces adverse effect repair.捷利特 cold welding workpiece by no heat welding, to ensure the integrity of the work, can also be used to strengthen the function of the workpiece hardening, to achieve workpiece wear resistance, heat resistance, corrosion resistance and so on. 1, the heat affected a very small due to the operating current (2-200A), time (1-600ms) can be precisely controlled, and therefore the energy input be precisely controlled. Ideal setting can enter only enough energy for fusion between the wire and the workpiece straight, will not have much energy to act on the workpiece, so that the surface is heated to minimize the impact. To achieve the desired effect patch. 2, can be very thin thickness welding Because welding current minimum stable operation in 2A, it can be very thin parts to be welded. 3, precision small parts due to the precise control of the welding current and stable operation of small, time, welding operating point but a very small, precise location, without affecting the surrounding impact. 4. The combination of a high degree As the welder belongs to cold welding high degree of binding, site after welding can be a variety of mechanical processing, does not have other types of cold welding after welding is binding not strong, fall off and so on. 5, for different parts of the welding a, plane parts of depression, hole, holes. b, slit trench. c, angular, ridgeline, peak portion d, the surface depressions after trachoma and general welding. e, welding electrical discharge machining, mold nitriding and soft desalination process.