Tangshan Matsushita welder YC-300TSP

Matsushita welder, Panasonic welding, Tangshan Matsushita welder, Panasonic welding machines, DC welding machine Panasonic, Matsushita thyristor welding machine, welding machine Tangshan Matsushita, Panasonic TIG welding machine, Panasonic TIG welding, stainless steel welding machine Panasonic, Panasonic welding machine, welding machine prices manufacturers Panasonic Panasonic YC-300TSP DC welding machine Product Name: thyristor controlled DC TIG welding power source Model: YC-300TSP available welding material: stainless steel, mild steel, high strength steel and Cr-Mo steel, copper brief description: Widely used in petrochemical, pressure vessels, power construction, stainless steel products and other industries Features 1, DC pulse TIG welding / DC TIG welding / DC manual welding three kinds of practices. 2, the unique constant current control when external conditions change, the welding current can be kept stable. 3, Panasonic's unique IC and SCR technology, instantaneous arc close to 100%. 4, even when the high-speed welding, arc too soft and stable. 5, depending on the application, can be "Yes / No / Repeat" three kinds of Crater control. TSP Thyristor Controlled DC TIG welding power source is widely used in petrochemical and electricity construction Pressure vessel Stainless steel products and other industries DC Pulse TIG welding / DC TIG welding, even at low current, arc success rate is very high thanks to Panasonic Unique IC and SCR technology control current from small to large currents, instantaneous high success rate of arc welding, even at high speeds, but also soft and stable arc, weld appearance. Because of the reduced output current ripple factor, so the current can remain stable, so when the welding speed, weld uniform appearance also. Use cable length 20 m torch welding, can ensure a stable output. Unique constant current control, even if the input voltage, ambient temperature, arc and other external conditions change, the welding current remain stable. Advantages of Matsushita DC pulse TIG welding: Weld look pretty neat and tidy uniform penetration weld penetration due to the uniform, high welding quality, no welding defects at all position welding of different thickness, better play the advantages rated Specifications Model: YC- 300TSP control: Rated input voltage thyristor Number: AC380 3-phase input power supply frequency: 50 / 60HZ rated input capacity: 16.5KVA / 11.5KW rated output current: 315A Rated output voltage: 22.6V Rated duty cycle: 60% No-load Voltage: 57V output current range TIG: 5-315A output voltage range TIG: 10.2-22.6A starting current and arc current income: 5-315A current rise time: 0.2-10s Current Fall Time: 0.2-10s early aspirated Time: 0.3 s post-gas time: 2-23s Arc spot welding time: 0.5-5s pulse frequency: 0.5-15HZ pulse width: 15-85% to the closing arc current control mode: Crater [have] · [No] · [repeatedly] Cited arc method: high-frequency arc shell protection grade: IP21S Insulation class: H Cooling: Forced air Dimensions: 470 * 560 * 845 Weight: 136kg Contact: Mr. Tang Mobile: 15021586862 Fax: 021-57796618