Shandong Mine mill fittings

MLT series compact center drive wet desulfurization mill - Shandong SEM Machinery Co., Ltd. Dongshan Coal Mine of MLT series compact center drive mill wet desulfurization, your best choice, quality class MLT series compact center drive mill is the introduction of wet desulfurization absorption the world's advanced technology developed by limestone / gypsum wet flue gas desulfurization system (Water Flue Gas Desulphurization, Acronym WFGD) dedicated mill, limestone slurry preparation for, the performance reached the international advanced level. This mill green energy, compact, light weight, easy installation and maintenance, reliable operation, high degree of automation, thermal power plants and large-scale coal-fired boiler system is suitable for high-performance WFGD limestone slurry preparation equipment can also be widely used in mineral processing, metallurgy , chemical industry materials wet grinding. First, the main technical indicators 1. Adopt international advanced mill wet desulfurization technology, with central drive, eliminating the need for small gears and spray lubrication device, reducing the mill weight, adopt a more reasonable seal structure, completely solve the problem of leakage of plasma wet ball mill. 2. Main bearing lubrication of two-way spray lubrication, main bearings self-aligning, effectively prevent the bush-burning and research watt phenomenon. 3. Main bearing temperature measurement devices and measurement points Improved: main bearing temperature measurement devices and temperature measuring point has been improved, with a special platinum RTD, temperature measurement points more than the traditional direct contact main bearing, the improved response time of temperature to one-tenth of the traditional eight-time temperature, which can increase the sensitivity, but also to achieve automatic control, eliminate the bush-burning phenomenon. 4. The new bearing seal: Improved traditional open bearing seal structure, the main bearing V-shaped rubber seal ring closed within injection grease structure, effectively prevent oil leaks, and avoid dust and ensure the bearing joint surface clean, easy bush-burning. 5. The new bearing has changed the way domestic mill with water cooling, lubrication system uses two sets respectively bearing lubrication and cooling, no process water for cooling, and to ensure that the mill performance and savings for users of process water. 6. Using line-contact main bearing: main bearing self-aligning bearing position between the bearing seat and the base line contact, without scraping the bottom surface of the bearing seat installation, operation reduces vibration, flexible and easy-aligning bush-burning. 7. The use of advanced detection equipment: The key parts cylinder flange, cover and other steel materials are fully flaw detection. UT machined surface were testing, so that the inherent quality in line with national standards. 8. Easy installation: the first in the country to achieve the overall product delivery, the whole installation, on-site and installed by small parts easy installation.