Jinan ribbed belt multi-groove band Machine Tool Factory outlets designated manufacturers PJPKPLPHPM

V-ribbed belt refers to the flat belt as the matrix, the inner surface of the arrangement have equally spaced longitudinal 40 ° trapezoidal wedge endless rubber belts, which face in the side of the wedge. V-ribbed belt advantages are: the contact area ribbed belts and pulleys and larger friction load more evenly distributed along the bandwidth, and thus greater transmission capacity; the belt body thin and light, flexible, reasonable structure, so Work stress is small, you can work on smaller pulley; ribbed belt drive also has a small vibration, heat fast, smooth operation, small elongation, transmission ratio and limit lines and high speed, thus longer life; energy savings Obviously, high transmission efficiency; drive compact, small footprint. In addition, the back of the V-ribbed belt can drive, but you can use the automatic tensioning device, make the drive more safe and reliable. V-ribbed belt is particularly suitable for the requirements of compact structure, large power transmission speed transmission. The main features are as follows: 1. Transmission power, the same space than ordinary V belt drive power 30% higher. 2. With tight transmission system, at the same transmission power, transmission means less space than ordinary V with a small 25%. 3. With a thin body, high flexibility, to adapt to the small drive pulley diameter (less than traditional belt pulley), but also drive a plurality of wheels. High-speed transmission with speed up to 40m / s; small vibration, less heat, running smoothly. 4. Heat, oil, abrasion, elongation and long life. Also known as multi-ribbed belt with a groove or groove band, the main application of the engine, motors and other power transmission equipment. Currently on the market there are types: PH, PJ, PK, PL, PM Market Applications: suitable for outdoor transmission equipment, transportation equipment, medical equipment, power tools, washing machines and sports equipment. Features: ribbed belt / multi-groove belt reduces heat accumulation and allow high-speed operation on small diameter pulleys. Fiber reinforced tank with superior wear resistance increases to maintain stable low stretch and minimal vibration achieve RMA oil heat standard technical parameters of the models ribbed belt strength and reliability of high-speed operation: PH V-ribbed belts: Belts Pitch: 1.6mm, belt thickness: 2.3mm, tooth height: 1.0mm, maximum belt line speed: 33m / s, the minimum pulley diameters: 8.5mm, the smallest diameter idler: 6mm PJ Ribbed Belt: Belt pitch: 2.34 mm, belt thickness: 3.2mm, tooth height: 1.6mm, maximum belt line speed: 33m / s, the minimum pulley diameter: 20mm, minimum idler diameter: 10mm PK V-ribbed belts: Belt pitch: 3.56mm, belt thickness: 4.45mm, tooth height: 2.15mm, maximum belt line speed: 50m / s, the minimum pulley diameter: 50mm, minimum idler diameter: 85mm / 60mm This V-ribbed belts for the automotive belt PL: Belt pitch: 4.7mm, belts Thickness: 6.6mm, tooth height: 1.6mm, maximum belt line speed: 50m / s, the minimum pulley diameter: 76mm, minimum idler diameter: 76mm PM Ribbed Belt: Belt pitch: 9.4mm, belt thickness: 12.4mm, Tooth height: 5.6mm, maximum belt line speed: 50m / s, the minimum pulley diameter: 177mm, minimum idler diameter: 177mm