Supply of K-type reciprocating feeder

K-type reciprocating feeder (stoker) for coal or other abrasive small, sticky little loose granular material feed, the feed storage bin or pit material uniformly continuous unloading or transport equipment fell Other screening devices. K-type reciprocating feeder is to use the toggle mechanism 5 ° tilt drag down the bottom plate on the roller linearly reciprocates, thereby coal or other abrasive small, sticky little loose granular, powdery material from feeding equipment that is uniformly discharged to feed the machine. K-type reciprocating feeder for mining, mine, coal preparation plant, the station, coal plants, port terminals and other bulk bulk transport, bulk material can be uniformly through the silo or directly to tape or reproduced Other screening equipment, storage devices, etc. used in conjunction. . Realize ore, sand coal, grain and other bulk materials uniform feeding of the equipment installed at the hopper body, gearing was suspended, according to the size of the feeding amount can be divided into: K1, K2, K3, K4 and so on several models . K-type reciprocating feeder (stoker) product works and Structure Description: K-type coal feeder from the rack, floor (for coal chute), transmission platforms, funnel, gates, roller and other components. When the motor is actuated by the flexible coupling, reducer, drag the toggle mechanism 5 ° tilt of the floor material for reciprocating movement on a roll, coal uniformly discharged to other devices. The machine can be provided with a funnel if necessary, without the funnel in two forms. Stoker has two structural forms: 1, with adjusted gate 2, without adjusting the gate, their ability to feed their journey to reach the floor. K-type reciprocating feeder (stoker) Product Features: 1, reliable, long life, light weight, small size and easy maintenance. 2, simple structure, reliable operation, easy installation and adjustment; a closed frame structure, greatly improving the rigidity of the chassis. 3, mounted a limited filling fluid coupling, with full load start, overload protection. 4, the maximum quantity of up to 1200 t / h (coal), is the largest reciprocating feeder. 5, using an advanced plane Double Enveloping Hourglass mule rod reducer design, carrying capacity, high transmission efficiency. 6, side liner, liner and keep the seam between the swash plate is adjustable, can more accurately control the left seam size, greatly reducing the leakage of material. 7, the driving device are arranged symmetrically, and dual push rod, so that the whole love of a balanced, smooth transmission, eliminating the pendulum back and forth when the phenomenon of the floor. 8, there is vertical to the floor ribs, and with three long pass roller bearing, plate itself guarantees rigidity, eliminating the existing reciprocating feeder plate bending work of ills. 9, wear-resistant steel liner by a small spell, so not only easy to replace the light, but according to the actual wear, targeted to replace the worn lining plate, so that the rational use of materials and reduce maintenance costs.