Sell ??double cone rotary vacuum dryer - dryer - speed operation of the dryer, selling excellent ..

I. Introduction SZG Double Cone Vacuum Dryer is my factory in the drying device combined with a new generation of technology similar products developed, it is mixed and dried in one of the new dryer; a condenser, vacuum pump and dryer facilities, Composition vacuum drying device. (If not required recovered solvent, condenser can not.) The machine advanced design, simple internal structure, easy cleaning, the material completely, easy to operate, can reduce labor intensity, improve the working environment. At the same time since the container material also flip the machine rotation, and the wall of the plot is not material, so heat transfer coefficient is high, drying rate, not only save energy, but also uniform drying adequate, good quality, can be widely used in the pharmaceutical, chemical, food, dyes and other industries drying, in line with the pharmaceutical industry "GMP" regulatory requirements. Second, the scope of application of this equipment is mainly used in pharmaceutical, chemical, food and other industries following materials dry. 1, residual volatiles recovered materials. 2, dry steam discharged recovered materials. 3, strong stimulation, toxic materials. 4, can not withstand the high temperature of the material. 5, easily oxidized materials. 6, do not allow the destruction of the crystal material. Third, the principle SZG double cone rotary vacuum dryer double cone rotating tank in a vacuum tank by the jacket into the steam or hot water, thermal oil is heated, the heat through the tank wall and wet material contact, after the wet material and evaporates moisture pumped by the vacuum system. Since the tank in a vacuum, and the rotating of tank so that the material constantly up and down, inside and outside the flip, so speed up the drying rate of materials, increase drying efficiency, to achieve uniform drying purposes. Fourth, the main features 1, low-temperature fast drying, powder mixing. 2, in particular, process design, equipment using a reliable mechanical seal, smooth operation. 3, the tank constantly rotating, heated surface materials to be updated. 4, indirect heating, avoiding contamination of materials, high temperature heat source of thermal oil, steam temperature and low temperature hot water. 5, thermal effect is high, higher than the average more than 2 times the oven. 6, the container rotation speed can be adjusted within the range of 3 ~ 12rpm. 7, temperature control, temperature display by a digital instrument. Fifth, the main technical parameters Project Model Name Unit 1,002,003,505,007,501,000 1,500,200,030,004,500 total volume L 100 200 350 500 750 1000 1500 2000 3000 4500 working volume L 50 100 175 250 375 500 750 1000 1500 2250 Heating area 1.16 square meters 2 2.63 4.61 5.58 1.5 3.5 7.5 9.6 13.8 Speed ??rpm 6 6 6 6 6 6 6 6 4 4 Power kw 0.8 1.1 1.5 1.5 2 3 3 4 5.5 7.5 rotating height mm 1600 1800 2000 2060 2270 2500 2800 3160 3500 4150 Total Weight Kg 550 70090011001200 1300 1,500,200,030,004,000 tank design pressure Mpa 0.3 Mpa -0.1 sandwich working pressure tank Mpa -0.08 ~ -0.096 sandwich Mpa 0.25 ~ 0.3 ℃ ≤80 mezzanine tank temperature ℃ ≤140