Wuhan Gold extraction tank, concentrator, alcohol recovery tower, reactor

Extraction tank is in the pharmaceutical, boil, put the multi-purpose equipment design process, in this process can be extracted, alcohol recovery, volatile oil separation. The equipment in addition to the master device from cans, but also with mist eliminators, cooler, water separator and so on. These devices contacting medicine are made of stainless steel at a heated mezzanine pressure vessel inspection departments through rigorous testing. The equipment in the extraction process is passed through a condenser, water separator, etc., to complete the system can completely seal closed loop, while the organic solvent recovered in the slag. Extraction principle: (1) water lift: water and medicine into the extraction tank, began to sandwich heat, reducing the supply of heat after boiling pot, boil the tank can be maintained, according to the extracted pharmacological process duration may be, such as a closed extraction the need for cooling water, so that the steam vapor cooled back extraction tank, maintaining circulation and temperature. (2) If the alcohol extract: First drug and alcohol added to the tank must be sealed to sandwich the steam heat, open cooling water to the tank to reduce the supply of heat when required temperature is reached, the ascending vapor into a liquid alcohol after alcohol reflux condenser then, in order to improve efficiency, can pump forced circulation, so that liquid from the tank is pumped out through the lower portion of the upper portion of the cylinder and then imported back into the tank, releasing local channeling. (3) oil extraction: medicine and water containing volatile oils added first extraction tank, open the circular valve oil separator, adjust bypass reflux valve, open the cooling water supply source for cooling valve opening reaches volatilization temperature, cooled solution should be to maintain a certain height so that the separation, and then rotated using a water separator in the separator. (4) recovering the spirits: the alcohol added to the cylinder, open the cooling water to steam, then open the valve can be recovered.