Slurry Puhou ZJ series slurry pump diagram Accessories

Slurry routine maintenance: 1) Bearing pressure, water should meet the requirements, at any time to adjust (or replace) the tightness of packing, do not cause seal leakage of plasma. And replace the sleeve. 2) When replacing bearings, bearing assemblies must ensure that dust, lubricants clean, slurry pumps running bearing temperature is generally not more than 60- 650C is appropriate, not exceeding 750C 3) to ensure that the motor and slurry pump concentricity to ensure complete and correct coupling elastic cushion, should be replaced if damaged. 4) Ensure the slurry pump components and piping systems installed correctly, solid and reliable. With parts 5) slurry pump parts subject to wear, in daily use to pay attention to the vulnerability of the loss situation, timely repair or replace them . Slag slurry pump wear parts for repair or replacement process to ensure proper assembly, the gap adjustment is reasonable, to avoid the phenomenon of friction tight astringent. 6) slurry pump suction piping system must not leak state, while in operation, should pay attention to whether there is clogging the inlet. It may be required to deal with the multi media slurry pumps with solid particles, thus placing the grille into the pump tank should meet the requirements of the particles by slurry pump could reduce the excessively large particles or long fibers of the material into the pump clogging sex. ZJ, ZGM type solid-liquid slurry pump, is currently using the international publication of the latest phase flow rate than the theoretical, by Tsinghua University designed highly wear resistant slurry pump. It makes the solid-liquid pump body full of energy conversion, but also improves the flow components of abrasion and corrosion. Advanced hydraulic design, reasonable structure design, coupled with high hardness wear-resistant materials, so that the pump is high compared with other slurry pumps have efficiency, cavitation performance, long life, reliable operation. It can be widely used in mining, metallurgy, electricity, coal and other industrial sectors and conveying tail, fine sands, ash, coal, gravel and other strong abrasive, high concentration slurry. Technical parameters: ZJ series slurry pumps and other technical parameters (1) models allow equipped with maximum power (kW) water performance interrupted by a maximum particle size (mm) Pump weight (kg) flow rate Q (m 3 / h) Head H (m) Speed ??n (r / min) maximum efficiency (%) NPSH r (m) 350ZJ-I-F100560526-233914.9-62.8300-59077.64.4965465300ZJ-I-A100450464-182615.3-65.2300-59081.13.0885265300ZJ-I -A95400441-173513.8-58.8300-59078.13.0885220300ZJ-I-A90560505-184421.2-79.9400-73082.83.9855005300ZJ-I-A85450477-174218.9-71.3400-73079.83.8854965300ZJ-I-A70630635-233316.0-76.8490-98080.43.9923560300ZJ-I-A65500589 -216613.8-66.2490-98077.43.7923531300ZJ-I-A56250395-15689.7-46.0490-98080.93.59630302