Manufacturers sell low-priced food waste screw press

Materials used for dewatering purposes of the press with a certain fibrous or sticky materials whose macroscopic world liquid separation operations such as grape pomace after fermentation, ginger, spinach, rubber, herbs, jujube, tea containing certain fibers or mention juice, also used in addition to continuous juicing through branch or twig containing a small amount of sea buckthorn, which specialized mesh size of special press materials manufacturing. Second, the principle and structure of the press as expeller, work process is: conveyor screw will go into the bin of material into the screw press, by the press screw pitch decreases and increases shaft diameter and wall screens and cones the role of body resistance, so that the material contained in the liquid material (juice) is extruded. The extruded liquid effluent from the meshes, then the juice is concentrated in the bucket. pomace after pressing, by the end of the screen cylinder and cone from the plane between the body, the rear spring-loaded cone, by adjusting the spring preload and location, you can change the size of the resistance and the slag discharge port, used to adjust the degree of wet and dry squeezed. The machine's feed boxes and screen cylinder and spiral are made of high quality acid 304 stainless steel.