Anhui Wilton G-type single screw 35-1

Applications environmental protection, industrial wastewater, sewage, shipbuilding industry, pharmaceutical, cosmetic, printing, paper a, G-type single screw pump Product Overview:. G series single screw pump is by circuitous turn engages displacement pump operating on the principle of new species, the main working parts are eccentric screw (rotor) and a fixed bush (stator). Because of the special geometry of the two components, namely the formation of a separate sealed cavity, medium implemented by the uniform axial flow, internal flow rate is low, the volume remains the same, pressure is stable and does not generate eddy currents and agitation. Each pump output pressure is 0.6MPa, head 60m (water), apply to the transmission medium temperature below the 80 ℃ (special requirements of up to 150 ℃). The stator is made because the choice of a variety of flexible materials, so this pump for high viscosity fluid delivery and contain hard suspended particulate media or transport medium containing fiber, has a general kind of incompetence pump characteristics. Proportional to flow and speed. Transmission can be direct drive coupling, or the use of variable speed motors, belt, gear transmissions and other means. This little pump parts, compact structure, small size, easy maintenance, the rotor and stator is wearing parts of the pump, simple structure, easy assembly and disassembly. Two, G-type single screw pump Features: G-type single screw pump has self-priming ability, strong suction height; small screw parts, compact structure, small size, easy maintenance, the rotor and stator are single screw wearing parts simple structure, easy assembly and disassembly. Jiong turn is based on the principle of work engaging new displacement pump types. G-type single screw pump working parts are eccentric screw (rotor) and fixed bushing (stator). Using non-toxic and tasteless food rubber, operating temperature up to 120 degrees Celsius, can contact with the unit if the high temperature of 120 degrees Celsius -350 degrees Celsius. Since the beginning of the special geometry of the two components are formed separate sealed cavity. Medium uniformly implemented by the axial flow. Internal generation of low flow rate, the volume remains the same. Pressure is stable, and thus will not product vortex and agitation. Each pump output pressure is 0.6MPa-1.2MPa, head 60m-120m (water), self-priming height generally more than 3m. Can be a self-priming sewage pump products. Third, the advantages of the G-type single screw pump: 1.jpg advantage compared to other pumps of 1, compared with a centrifugal pump single screw without installing the valve, the flow is stable linear flow. 2, compared with single-screw pump pneumatic diaphragm pumps can transport a variety of mixed gas containing impurities and solid particles or fibers of the media, but also transport a variety of corrosive substances. 3, compared with a gear pump, single screw pump can transport high-viscosity substances. 4, with the piston, diaphragm, gear pump that can be used for pharmaceutical filling screw and metering. Four, G-type single screw pump works: G-type single screw [1] belong rotor displacement pump, it is relying on intermeshing screw and bush in the suction chamber and the discharge chamber to produce a change in the volume of liquid delivery. It is a closed screw the ring, the main working parts of the bush with a double spiral cavity (stator) and the single-head auger screw cavity meshing with the stator (rotor) component. When the input shaft universal joint drive by the rotor rotating around the center of the stator for the planet, the stator - rotor deputy to form a sealed chamber continuously engage these sealed chamber volume unchanged for uniform axial movement of the transport medium from the suction side through the stator - delivered to the rotor deputy press out the end, the suction chamber sealed medium flows through the stator without being agitated and destruction. Five, G-type single screw pump technical parameters: Flow: 0-150m3 / h; Head: 0-240m; power: 0.75-37kw; Speed: 500-960r / min; diameter: 20-135MM; temperature: -15-200 ℃.