100QJ stainless steel submersible pump

100QJ stainless steel submersible pump Conditions: 1. medium temperature does not exceed + 40 ℃; PH value (room temperature water) 2. The medium is between 6.5-8.5; 3 medium solids content (by mass) is not greater than 0.01% Important Note: 1. Before using the pump should carefully read the product instructions. It must be grounded before 2. pump to use. 3. The power supply terminal should be installed fuse, leakage protection switch. 4. Pump anhydrous Trial prohibited. 5. The pump should be under trial operation under normal circumstances, it is put into use. 6. Plug the power cord is prohibited physical contact with the high temperature to ensure good insulation of the line, in order to avoid leakage wounding. 7. ensure all submerged water pump operation should not lie down, out of the water or into the mud run. 8. pump work, can not be someone close to the work surface and livestock exposure, to guard against electric shock. 9. Check, handling, must cut off the power supply before servicing pump. 10. When lifting or carrying the pump can not pull the cables are damaged should be replaced immediately!