3G three screw

Yijia Botou pump production pump 3G series features: 1, transmission fluid smooth, no pulse, no agitation, vibration and low noise. 2, has a strong self-absorption properties, when multiphase, gas rate is not higher than 80%, the sediment concentration of not more than 500g / m3. 3, external bearing structure, with independent lubrication, can transport all kinds non-lubricating media. 4, using synchronous gear drive, no contact between the two rotors, even for a short spin it anyway. 5, the body with a heating jacket, can transport all kinds of clean or contain low or high viscosity medium solid small particles (typically particle diameter of less than 0.12-0.2mm) 6, the correct choice of materials can be transported even many corrosive media. 7, double-suction structure, no axial force on the rotor. 8, shaft with mechanical seal or bellows mechanical seal, with a long life, low leakage, wide range of features. 3G Series pumps Botou Yijia pump production apply to the maximum working pressure 4.0MPa, flow range 1 ~ 1000m3 / h, a temperature range of -20 ~ 120 ℃, medium viscosity 1 ~ 3000mm2 / s, lower speed can reach 106mm2 / s Medium viscosity greater impact on the performance of the double screw pump nominal displacement refers to displacement under specific viscosity conditions to ensure that the pump can operate at a high efficiency, the test is not sufficient, we recommend the following viscosity condition selection Speed: Medium viscosity cSt speed r / min