How to buy dryer dryer Specifications Acer machinery

It decided to sand dryer highest temperature of the heating medium that is the nature of the treatment of solid material and whether it is allowed to pollution and other factors. The processing of materials allowed to be contaminated, the desired temperature is high, you can use our new product gas furnace as the heat carrier, the product energy saving, high thermal efficiency. As a high local environmental requirements, want energy efficiency, the use of gas stoves hygiene is the best choice. Gas furnace burner in energy efficiency than saving at least 20% or more, in the artificial also saves a lot of gas furnace generally have a staff member to operate and does not require constant stoker, another gas furnace You can with the stop with the use of up to 10 days without work, next time you can continue to use. Dry if they are not allowed to be contaminated objects, and does not allow the air to dilute, the heat should be passed through the drum wall, this time, the drum load brick indoor, flue gas is passed through the outer tube, can also be downloaded barrel Install the center pipe or tube, casing surface heat exchangers, heat transfer using a metal wall. Heating medium for the flue gas, steam or electric heating. Carrying dry material, only through a clean gas, the evaporation of water away. In short, the choice should be based on the heat carrier material requirements and the local natural advantages may be, otherwise it will affect production efficiency and economic benefits. Used sand dryer advantages: 1. Low price: because it is second-hand, or many hands, and in the transfer process, there is a big difference between the purchase price of new equipment, many customers also direct attention to this point, has become the The main reason to buy used equipment or limited due to the cost of capital. 2. Rapid production: As the dryer is used sand production has been in practice, the whole process will be more familiar, but also more convenient to operate, and the host associated equipment have experienced run-in period, be able to fast complaints production. 3. Save production time: for the used sand drying the whole process, in the production process prone to problems, and solutions will be more relevant and timely, after the problems that arose were resolved quickly, improve production efficiency.