Gold placer with gold equipment, leavened with gold agitation tank, agitation tank leavened with gold machinery

Leavened agitation tank maintenance is simple. It can be used alone and fixed leavened groove together, can be connected to electricity, and fixed leavened slot is not much difference. At best, the most difficult is to change the silicone bottom (single 3 ---- 6 months for once, a rubber 100 dollars to get. Double thick for once a year to two years), two unskilled Workers use two or three hours. To concentrate the process, I recommend the use of our gold placer developed specifically for high weir rocking groove. If not, you can use the second channel peristaltic leavened concentrate and then manually or with shaker shake choose. All artificial hand-shake option only as a last resort it might pass. Agitation leavened groove: groove is leavened with gold using a fixed principle, the installation of a silica gel plate agitation means for mechanical agitation plate, the bottom plate up and down cycle agitation to prevent sediment compaction, periodic agitation, complete stratification and flushing, improve the alluvial gold recovery. Leavened agitation tank for gold and thin gold capillary effect is very good, and simple structure, reliable, low failure, low energy consumption, water consumption is small, it is a practical shakin equipment. Leavened common parameters agitation tank: Model LS-1200 * 3500 installation dimensions (length x width x height) (m) 3.5x1.2x0.8 workload (m3 / h) 40 feed size (mm) 1-10 ore concentration (%) 30-50 water consumption (m3 / h) 80-120 equipped with a net electrical power 4kw selected rate (%) 90 installation angle (°) 6-7 cycles of discharge (h) 4 agitation frequency (times / min) 25 Total weight (kg) to about 800