Operation and protection of conservation belt conveyor

 Belt conveyor http://www.zzhjzg.com/ss01.html, also known mainly from the rack conveyor belt, conveyor belts, belt roller, tensioning equipment, transmission equipment and other components. Body made of high quality steel link from the front and rear legs irregularities constitute rack difference, the plane was certainly skewed viewpoint. Equipped with a belt roller frame, roller, etc., for the femoral artery and the support conveyor belts. Deceleration drum drive electric motor drive and two methods. Operation: 1, the operation of the belt conveyor 2, before shutting down to see if there is an obstacle to endanger the delivery on the conveyor belt. If there is, to remove obstacles to; 3, before shutting down the power supply is not normal to be investigated and, if necessary measure to be allocated to ensure proper voltage equipment needs; 4, if after viewing device is normal, can shut down operation ; switch off a sequence order Note: Closing the control box in the power switch (power indicator lights) → launch Start button → The ratio control switch is turned to "ON" orientation → gradually rotating speed control knob to. the desired speed scale. It uniform operation; do not exceed 1500rpm scale use. b shutdown order: the ratio control knob gradually spin back to "0" orientation → be flat conveyor stopped after the ratio control switch is turned to the "OFF" orientation → closed ignition switch and the power switch. Protection conservation: 1, viewing drive motor and gear every day is not unusual; 2, see the belt is not loose every day, and timely adjustment; 3, monthly view conveyor belts are not stretched, and timely adjustment; 4, the monthly view Roller change is not sensitive, and timely repair; 5, the monthly view of the drive sprocket and chain consistent, timely adjustment, and to increase the chain lubricants; 6 month control box with an air gun blow off the dust, to avoid problems; 7, the first use of the gear unit to be replaced after 100 hours of cleaning the inside of gear oil, put new oil every 2500 hours and then replaced once; 8, do a large annual maintenance, View Accessories extent of the damage. Acer http://www.hjksjx.com/ Henan Mining Machinery Co., Ltd. specializes in producing crusher | crusher | mill | rotary kiln | dryer and other product lines. Information from: Henan Acer http://www.zzhjzg.com/ offer you, please indicate. zxy